LevelOne FCS-3051 User Manual page 23

3. Make the required adjustments, as explained below, and save your changes.
MPEG-4 Settings
Resolution
Video Quality
Control
Max. Frame Rate
MJPEG Settings
Resolution
Fixed Video
Quality
Max. Frame Rate
Mobil Settings
Enable Mobil
Streaming
Resolution
Video Quality
Control
Max. Frame Rate
Access Code
Video Adjustment
Power Line
Frequency
White Balance
Brightness
Sharpness
Select the desired video resolution format. The default resolution is
set to 320*240.
•
Constant Bit Rate: Select the desired bit rate. The default is set
to 256 Kbps.
•
Fixed Quality: Select the desired option. The default fix quality
is set to Normal.
Select the desired Maximum bandwidth for the video stream. Note
that you can specify EITHER the Bandwidth OR the Frame Rate,
not both. If the Bandwidth is defined, the frame rate will be adjusted
as necessary to achieve the specified frame rate.
The default value for bandwidth is 30.
Select the desired video resolution format. The default resolution is
set to 320*240.
Select the desired fix quality. The default fix quality is set to
Normal.
Select the desired Maximum bandwidth for the video stream. Note
that you can specify EITHER the Bandwidth OR the Frame Rate,
not both. If the Bandwidth is defined, the frame rate will be adjusted
as necessary to achieve the specified frame rate.
The default value for bandwidth is 30.
Enable streaming video for the mobile device by checking this
checkbox.
The default resolution is set to 160x120.
•
Constant Bit Rate: Select the desired fix bit rate.
•
Fixed Quality: Select the desired option. The default fix quality
is set to Normal.
Select the desired Maximum bandwidth for the video stream.
Enter the 8-digit code (0~9) for accessing the live video from
camera through cell phone connection.
Select the power line frequency (50Hz or 60Hz) used in your region,
to improve the picture quality under florescent lighting.
Select the desired option to match the current environment and
lighting.
If necessary, you can adjust the brightness to obtain a better image.
For example, if the camera is facing a bright light, the image may be
too dark. In this case, you can increase the brightness.
Select the desired option for the sharpness. You can select a
Sharpness value between -3 and 3.
19