Reset To Factory Default Settings - Axis P5522 User Manual

Ptz dome network camera

Hide thumbs Also See for P5522:

Table of Contents

AXIS P5522 PTZ Dome Network Camera

System Options

Uploaded ﬁles are accessed through http://<ip address>/local/<user>/<file name> where <user> is the

selected user group (viewer, operator or administrator) for the uploaded ﬁle.

Plain Conﬁg

Plain Conﬁg is for advanced users with experience of Axis product conﬁguration. All parameters can be set and modiﬁed from this

page. Help is available from the standard help pages.

To open Plain Conﬁg, go to System Options > Advanced > Plain Conﬁg.

Reset to factory default settings

This will reset all parameters, including the IP address, to the factory default settings:

1. Press and hold the Control button and the Restart button at the same time (see Hardware overview, on page 4 ).

2. Release the Restart button but continue to hold down the Control button for about 15 seconds until the Status indicator

ﬂashes amber.

3. Release the Control button. The process is complete after about 1 minute (when the Status indicator turns green). The

product has been reset to the factory default settings. The default IP address is 192.168.0.90

4. Re-assign the IP address.

It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.

Table of Contents