AXIS P5522 PTZ Dome Network Camera
Events
Events
Predefined parameters, known as an Event or Event Type, can trigger actions in the Axis product. A common event type is an alarm
that causes the product to upload images to an Event Server.
Triggered events - are activated by a signal, for example motion detection.
Scheduled events - run at preset times, in a repeating pattern on selected weekdays.
Actions - refer to what happens when an event occurs.
Triggered events can be activated by:
•
Input ports
•
Motion detection, see page 31
•
Audio detection, see page 33
•
A trigger from an uploaded application, see Applications, on page 27
•
Pan Tilt Zoom — when the view stops at a preset position
•
Full disk — when the SD card has less than 1 MB free memory left
•
System events, for example on boot.
Event actions include:
•
Uploading images to an event server or send images by email
•
Saving the video stream to the product's SD card
•
Sending notification messages and emails
•
Activating an output port, for example, to sound an alarm or lock a door
•
Pan Tilt Zoom — go to a preset
•
Playing an audio clip
Event Servers
Event servers receive uploaded image files and/or notification messages. To set up event server connections in the Axis product, go
to Events > Event Servers and enter the required information for the server type.
Note
Email servers are configured under System Options > Network > SMTP (email).
When the setup is complete, click Test to test the connection (the connection test takes approximately 10 seconds).
Server type
FTP Server
Purpose
• Receives uploaded images
Information required
• Descriptive name
• Network address and upload path
• User name and password
28