Removing And Replacing The Casing Cover (Ventilation Slot Cover) To Get Rid Of Dust - Fujitsu LIFEBOOK T901 Operating Manual

Working with the notebook
Removing and replacing the casing cover (ventilation
slot cover) to get rid of dust
To ensure optimum cooling of your notebook's components, you should clean
the ventilation slots of the cooling fan after prolonged use.
This ensures optimum fan performance. Best cleaning results are achieved
using a small hand-held vacuum cleaner.
If necessary, use a dry brush to remove dust from the ventilation slots.
Do not use any cleaning liquids! Ensure that liquid does not enter the device.
To avoid the device overheating, do not remove the ventilation slot
cover when the device is switched on.
► Prepare for removal, see chapter
2
58
"Preparing to remove components", Page
1
1
► Keep the locking tabs of the ventilation
slot cover pressed down (1).
► Lift the ventilation slot cover out
of the bay (2).
► Clean the dust chamber with a dry brush.
► Insert the ventilation slot cover into slot (1)
and ensure that you feel it click into place.
► Complete the removal, see chapter
"Finishing component removal", Page
Fujitsu Technology Solutions
106.
112.