Table of Contents
Advertisement
Removing and replacing the casing cover (ventilation
slot cover) to get rid of dust
To ensure optimum cooling of your notebook's components, you should clean
the ventilation slots of the cooling fan after prolonged use.
This ensures optimum fan performance. Best cleaning results are achieved
using a small hand-held vacuum cleaner.
If necessary, use a dry brush to remove dust from the ventilation slots.
Do not use any cleaning liquids! Ensure that liquid does not enter the device.
Be careful not to damage the ventilation fins. Do not use hard objects for cleaning.
To avoid the device overheating, do not remove the ventilation slot
cover when the device is switched on.
► Prepare for removal, see chapter
1
1
Fujitsu Technology Solutions
"Preparing to remove components", Page
2
1
Working with the notebook
► Keep the locking tabs of the ventilation
slot cover pressed down (1).
► Lift the ventilation slot cover out
of the bay (2).
► Clean the dust chamber with a dry brush.
► Insert the ventilation slot cover into slot (1)
and ensure that you feel it click into place.
► Complete the removal, see chapter
"Finishing component removal", Page
105.
108.
61
Advertisement
Table of Contents
