Fujitsu LIFEBOOK T901 Operating Manual page 91

New SmartCards have a preset PUK (see above).
if you want to re-initialise a previously initialised SmartCard, you will need
to know the PUK which was assigned to it.
► Enter the PUK.
When the following appears:
• ACCESS DENIED = You have entered an invalid PUK. After six failed attempts,
the SmartCard will be blocked and can no longer be used.
► Enter a new PIN at the following prompt:
Enter new PIN:
Confirm new PIN:
A number with 4 to 8 digits is acceptable for the new PUK. For security
reasons, we recommend that you change the PUK for every SmartCard,
and use an 8-digit number each time.
► Re-enter the new PIN to confirm.
When the following appears:
• PIN/PUK do not match = You have confirmed the PIN incorrectly. You will be
requested to re-enter the new PIN and reconfirm.
Please wait a few seconds after confirming the new PIN: SystemLock is being installed.
The following message will be displayed if installation is successful:
Setup Notice
Changes have been saved
[Continue]
► Now press the Enter key. The SystemLock administration menu will be displayed:
Fujitsu Technology Solutions
Security functions
87