Limiter; Bridged Mode - Electro-Voice P3000RL Owner's Manual

REAR VIEW

LIMITER

BRIDGED MODE

The integrated limiter provides reliable protection against signal clipping and
has a switchable time constant. Leaving the switch set to SLOW is
recommended for general use (factory pre-set status).
When using the power amplifier as Mid/Hi power amp employed in active
multi-way systems, setting the limiter switch to FAST is recommended.
When using the power amplifier as low-frequency woofer power amp
employed in active multi-way systems, setting the limiter switch to SLOW is
recommended.
Switch for changing from normal (stereo) operation to bridged mode. In
bridged mode the integrated power amplifiers operate in „push-pull"
operation. The output voltages of cannel „A" and channel „B" are doubled
and present at the BRIDGED OUT connector. Channels „A" and „B" work
phase-shifted in push-pull operation and may not be used as loudspeaker
outputs.
10