Standard Horizon HX400 Owner's Manual page 5

SAR compliance for body-worn use was only demonstrated for the spe-
cific belt-clip (CLIP-22). Other body-worn accessories or configurations
may NOT comply with the FCC RF exposure requirements and should be
avoided.
The CLIP-22 belt-clip must be used in order to comply with the FCC/IC RF
exposure requirements.
Always use Standard Horizon authorized accessories.
The information listed above provides the user with the information needed
to make him or her aware of RF exposure, and what to do to assure that
this radio operates with the FCC RF exposure limits of this radio.
Electromagnetic Interference/Compatibility
During transmissions, this radio generates RF energy that can possibly
cause interference with other devices or systems. To avoid such interfer-
ence, turn off the radio in areas where signs are posted to do so.
Do not operate the transmitter in areas that are sensitive to electromag-
netic radiation such as hospitals, health care facilities, aircraft, and blast-
ing sites.
HX400 Page 5