Table of Contents
Advertisement
CH NAME
Function: Changes the channel name shown on the dis-
play.
To change the channel name:
1. Select the channel you wish to change the name be-
fore following the steps below.
2. Turn off the HX400 by rotating the VOL knob counter clockwise.
3. Hold down the
the
key.
4. Press the
5. Press the
corner of the display.
6. Press the
bol) in the name, then press the
7. Repeat step 6 as many times as necessary to complete the name tag (up
to 12 characters).
8. After completing your adjustment, press the
ting.
9. Press the
MEM CH
Function: Programming Scan Memory.
See page 24 for details of the programming.
SCRAMBLER
Function: Enables/Disables the Voice Scrambler and se-
lects its scramble code.
Available Values: oFF / SC0 / SC1 / SC2 / SC3
Default: oFF
NOISE CANCEL
Function: Enables/Disables the Noise Canceling Micro-
phone.
Available Values: on / oFF
Default: on
Page 30
key, then turn on the transceiver while still holding down
or
key to select "CH NAME".
key. The current channel name will appear on the upper left
or
key to select the first character (letter, number, or sym-
key to exit to normal operation.
key to move to the next character.
key to save the new set-
HX400
Hide quick links:
Advertisement
Table of Contents
