Note:
Some system cases do not have all four cables. Be sure to match the
name on the connectors to the corresponding pins.
PWRSW
Attach the power button cable from
the case to these two pins. Pressing
the power button on the front panel
turns the system on and off rather
than using the onboard button.
HD_LED
Attach the hard disk drive indicator
LED cable to these two pins. The
HDD indicator LED indicates the
activity status of the hard disks.
RESET
Attach the Reset switch cable from
the front panel of the case to these
two pins. The system restarts when
the
switch is pressed.
RESET
EVGA Z77 Stinger Motherboard
Table 2.Front Panel Header Pins
HD_LED
PWRLED
RESET
PWRSW
No Connect
Empty
Pin
Signal
1
HD_PWR
3
HD Active
2
PWR LED
4
STBY LED
5
Ground
7
RST BTN
6
PWR BTN
8
Ground
9
+5V
10
Empty
17