8-Pin Atx 12V Power (Atx_Pwr_8P); Connecting Internal Headers; Front Panel Header - EVGA Z77 Stinger User Manual

EVGA Z77 Stinger Motherboard
8-pin ATX 12V Power (
, the 8-pin ATX 12V power connection, is used to provide power to the
PW1
CPU. Align the pins to the connector and press firmly until seated.

Connecting Internal Headers

Front Panel Header

The front panel header on this motherboard is one connector used to connect
the following four cables.
(see Table 2 for pin definitions):
PWRLED

Attach the front panel power LED
cable to these two pins of the connector. The Power LED indicates the
system's status. When the system is powered on, the LED will be on. When
the system is turned off, the LED is off. When the system is in S1, S3,
S4 status, the LED will blink.
16
ATX_PWR_8P)
+12V
GND