Installing The Cpu Fan - EVGA Z77 Stinger User Manual

Align the notches in the processor with
the notches on the socket.
Lower the processor straight down into the
socket without tilting or sliding it into
the socket.
Note: Make sure the CPU is fully seated and
level in the socket.
Lower the load so it is resting on the CPU.
Pull back the socket lever again to ensure the
load plate tip engages under the shoulder
screw up and protective cover will be
rejected by installed CPU.
Carefully lock the lever back into place.
The CPU installation is complete.

Installing the CPU Fan

There are many different fan types that can be used with this motherboard.
Follow the instruction that came with your fan assembly. Be sure that the fan
orientation is correct for your chassis type and your fan assembly.
EVGA Z77 Stinger Motherboard
Align notches with notches on the CPU
11