Synology Rackstation At A Glance - Synology RackStation RS212 Quick Installation Manual

Synology RackStation at a Glance

No. Article Name
1) Power Button
2) Beep off Button
3) LED Indicators
Motherboard
4)
Lock
5) eSATA Port
6) Console Port
7)
USB Ports
8) LAN 1
9)
LAN 2
10) RESET Button
11) Hard Drive Trays
12)
Fans
13)
Power Port
-----
1
For more information about Synology Expansion Unit supported by your RackStation, please visit
4 Chapter 1: Before You Start
Location
The power button is used to turn Synology RackStation on or off.
Front
To turn off Synology RackStation, press the Power Button and hold it until you hear
Panel
a beep sound and the Power LED starts blinking.
Front
The Beep off Button is used to turn off the beep sound of Synology RackStation.
Panel
The LED indicator is used to display the status of the internal disk and the system.
Front
Panel For more information, see "Appendix B: LED Indication Table" on Page 15.
The motherboard lock is used to lock or unlock the motherboard on Synology
Front
Panel RackStation.
The eSATA port is used to connect external SATA disk or Synology Expansion
Front
1
Panel Unit to Synology RackStation.
Front
This port is used for manufacturing purpose only.
Panel
The Synology RackStation offers USB ports for adding additional external hard
Front
Panel drives, USB printers, or other USB devices.
Front
The LAN port is where you connect RJ-45 cable to Synology RackStation.
Panel
1. To restore IP, DNS, passwords for the admin account to default value.
Front
Panel 2. To reinstall the Synology RackStation.
The hard drive trays are designed for loading the hard drives used in
Front
Panel Synology RackStation.
The fans are built to exhaust waste heat out of Synology RackStation. If any of the
Side
Panel fans is malfunctioning, the system will beep every 1 second.
Back
The power port is where you connect the power cord to Synology RackStation.
Panel
Description
www.synology.com .