Table of Contents
Advertisement
Synology DiskStation at a Glance
No.
Name
1)
LED Indicators
2)
Power Button
3)
Fan
4)
USB Ports
5)
RESET Button
6)
LAN Port
7)
Power Port
4 Chapter 1: Before You Start
Location
The LED indicator is used to display the status of the internal disks and the
system. For more information, see "Appendix B: LED Indication Table" on Page
Front Panel
16.
The power button is used to turn Synology DiskStation on or off.
Front Panel
To turn off Synology DiskStation, press the power button and hold it until you
hear a beep sound and the Power LED starts blinking.
The fan is built to exhaust waste heat out of Synology DiskStation. If the fan is
Back Panel
malfunctioning, the system will beep every 2~4 seconds.
The Synology DiskStation offers USB ports for adding additional external hard
Back Panel
drives, USB printers, or other USB devices.
1. To restore IP, DNS, passwords for the admin account to default value.
Back Panel
2. To reinstall the Synology DiskStation.
The LAN port is where you connect RJ-45 cable to Synology DiskStation.
Back Panel
The power port is where you connect the AC power adapter to
Back Panel
Synology DiskStation.
Description
Advertisement
Table of Contents
