Chapter 2: Hardware Setup; Tools And Parts For Hard Disk Installation; Install Hard Disks - Synology RackStation RS212 Quick Installation Manual

Hardware Setup
Chapter 2:

Tools and Parts for Hard Disk Installation

 A screwdriver
 At least one 3.5" or 2.5" SATA hard disk
(Please visit www.synology.com
Warning: If you install a hard disk that contains data, the system will format the hard disk and erase all data. If you
need the data in the future, please back it up before installation.

Install Hard Disks

1 Pull the hard drive tray handle in the direction as indicated below to remove the hard drive tray.
2 Place the hard disk in the hard drive tray, turn the tray upside down, and then tighten the screws to secure the
hard disk.
 For 3.5" Hard Disk:
 For 2.5" Hard Disk:
6
for compatible hard disk models.)
C h a p t e r
2