Create A Raid (Only For N2200Plus/Evo,N4100Evo) - Thecus N4100EVO User Manual

This screen lists the RAID volumes currently residing on the Thecus IP storage. From
this screen, you can get information about the status of your RAID volumes, as well
as the capacities allocated for data, and iSCSI(N4100EVO). There is also a graph
which represents how the RAID volume is currently allocated.
RAID Information
Item
ID
RAID Level
Status
Disks Used
Total Capacity
Data Capacity
iSCSI Capacity
Create a RAID
(Only for N2200PLUS/EVO,N4100EVO,as the N2200 and N0204 use the Smart
Utility).
On the RAID Information screen, press the create button to go to the
CREAT RAID screen. In addition to RAID disk information and status, this
screen lets you make RAID configuration settings.
Using Create RAID, you can select stripe size, choose which disks are RAID disks or
the Spare Disk.
RAID Configurations
Item
Disk No.
Capacity (MB)
Model
Status
Description
ID of the current RAID volume.
NOTE: All RAID IDs must be unique.
Shows the current RAID configuration.
Indicates status of the RAID. Can read either Healthy,
Degraded, or Damaged.
Hard disks used to form the current RAID volume.
Total capacity of the current RAID.
Indicates the used capacity and total capacity used by user data.
Indicates the capacity allocated to iSCSI. (N4100EVO)
Description
Number assigned to the installed hard disks.
Capacity of the installed hard disks.
Model number of the installed hard disks.
Status of the installed hard disks.
61