Brother MFC-J625DW Basic User's Manual page 79

Error Message
B&W Print Only
Replace Ink
Cannot Detect
Cause
One or more of the colour ink
cartridges have reached the end of
their life.
You can use the machine in
monochrome mode for approximately
four weeks depending on the number
of pages you print.
While this message appears on the
LCD, each operation works in the
following way:
 Printing
If you choose Greyscale in the
Advanced tab of the printer driver
you can use the machine as a
monochrome printer.
Duplex print is not available when
this message appears.
 Copying
If the paper type is set to
Plain Paper you can make
copies in monochrome.
Duplex copy is not available when
this message appears.
 Faxing
If the paper type is set to
Plain Paper or Inkjet Paper,
the machine will receive and print
the faxes in monochrome.
If a sending machine has a colour
fax, the machine's "handshake"
will ask that the fax be sent as
monochrome.
If the paper type is set to
Other Glossy, Brother BP71 or
Brother BP61 the machine will stop
all print operations.
You installed a new ink cartridge too
quickly and the machine did not detect
it.
If you are using non Brother Original
ink the machine may not detect the ink
cartridge.
An ink cartridge is not installed
correctly.
Troubleshooting
Action
Replace the ink cartridges. (See
Replacing the ink cartridges
uu page 64.)
If you unplug the machine or take out
the ink cartridge, you cannot use the
machine until you change to a new ink
cartridge.
Take out the new ink cartridge and
re-install it slowly until it clicks.
Replace the cartridge with a Brother
Original ink cartridge. If the error
message remains, contact your
Brother dealer.
Take out the new ink cartridge and
re-install it slowly until it clicks. (See
Replacing the ink cartridges
uu page 64.)
B
71