How to scan to a computer
Scanning a document
There are several ways to scan documents.
You can use the SCAN key on the machine or
the scanner drivers on your computer.
To use the machine as a scanner, you
must install a scanner driver. If the
machine is on a Network, configure it
with a TCP/IP address.
Install the scanner drivers from the
CD-ROM. (uuQuick Setup Guide)
Configure the machine with a TCP/IP
address if network scanning does not
work. (uuSoftware User's Guide:
Configuring Network Scanning for
and Configuring network
scanning for Macintosh)
Load your document. (See How to load
documents uu page 19.)
Do one of the following:
To scan using the SCAN key on the
machine, go to Scanning using the
To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver.
Scanning using the
For more information
uuSoftware User's Guide: Using the Scan
Press a or b to choose the available
scan modes as follows.
Scan to E-mail
Scan to Image
Scan to OCR
Scan to File
(Web Services Scan)
This function is available after you download
and install Presto! PageManager from
(uuSoftware User's Guide: Using Web
Services for scanning on your network
(For network users)
Press a or b to choose the computer you
want to send the data to.
Press Black Start or Color Start to
SP2 or later and