Brother DCP-J140W Basic User's Manual page 43

Error Message
Clean Unable XX
Init Unable XX
Print Unable XX
Scan Unable XX
Close Ink Cover
Cover is Open
Data Remaining
High Temperature
Cause
The machine has a mechanical
problem.
—OR—
A foreign object such as a paper clip or
ripped paper is in the machine.
The ink cartridge cover is not
completely closed.
The scanner cover is not completely
closed.
Print data is left in the machine's
memory.
The print head is too warm.
Troubleshooting
Action
Open the scanner cover and remove
any foreign objects and paper scraps
from inside the machine. If the error
message continues, disconnect the
machine from the power for several
minutes and reconnect it.
Firmly close the ink cartridge cover
until it clicks.
Lift the scanner cover and then close it
again.
Press Stop/Exit. The machine will
cancel the job and clear it from the
memory. Try to print again.
Allow the machine to cool down.
B
33