External Devices; Volume Adjustment; Volume Increase/Decrease; Programmable Turn-On Volume - Jensen VM9215BT Operating Instructions Manual

External Devices

External peripheral devices, including a game console, camcorder, navigation unit,
iPod, Zune, etc. can be connected to this unit via RCA output using an A/V Media
Adapter Cable (not included).
Connect the external device to the A/V Media Adapter Cable and then plug the
cable into the A/V INPUT connector on the front of the radio. Select "AUX IN1" on
the SOURCE MENU to access auxiliary devices. You cannot directly control external
devices connected to the A/V INPUT.
For information regarding the use of USB devices, see "Inserting a USB Device. "

Volume Adjustment

Volume Increase/Decrease

To increase or decrease the volume level, turn the rotary encoder on the front
panel or press the VOL +/VOL - buttons on the remote control. When the volume
level reaches "0" or "40", a beep sounds, indicating that the adjustment limit has
been reached. The LCD or TFT screen displays the volume level for 3 seconds.

Programmable Turn-On Volume

This feature allows the user to select a turn-on volume setting regardless of the
volume setting prior to turning the unit off . To use this feature, the TFT monitor
must be displayed.
To program a specifi c turn-on volume level, turn the rotary encoder to adjust the
volume to the desired turn-on volume. Push and hold the rotary encoder while
the blue speaker icon and level indication is displayed on the screen. The unit will
beep to confi rm your turn-on volume setting.
18
A / V
INPUT
VM9215BT
Right Audio
1
Left Audio
2
Ground
3
Video
4
3.5mm A/V Cable (not included)