Setting The Bluetooth Connection (Bt In); Hands-Free Phone Setting (Hfp); Bluetooth Audio Setting (Audio); Setting The Bluetooth Device - Alpine CDE-133BT Owner's Manual

Note
• The BLUETOOTH setup mode can also be activated by pressing and
holding f for at least 2 seconds.
3
Turn the Rotary encoder to select the desired items and
then press ENTER.
BLUETOOTH:
*1
 PAIRED DEV  VISIBLE M
BT IN
*2
 SENDER ID
CALL SOUND
*2
 PB ORDER  AUTO ANS
 FW VERSION  FW UPDATE
The items are not displayed during a phone call.
The items are not displayed if "HFP" is set to OFF. Refer to
"Setting the BLUETOOTH Connection (BT IN)" on page 24.
4
Turn the Rotary encoder to change the settings.
5
Press and hold AUDIOSETUP for at least 2 seconds.
The SETUP mode is cancelled.
Notes
• Press  to return to the previous mode.
• Pressing and holding  for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting the BLUETOOTH Connection (BT
IN)
With BLUETOOTH technology, you can place a hands-free call by a
BLUETOOTH-equipped mobile phone.
Audio information of a BLUETOOTH compatible mobile phone, a
portable audio player, etc., is controllable/playable wirelessly from this
unit.
 Setting item: BT IN
 Further setting items: HFP / AUDIO
Setting contents:
OFF / ON (Initial setting)

Hands-Free Phone setting (HFP)

ON:
Select when you want to pair your BLUETOOTH compatible phone
with this unit.
OFF:
Hands-Free Phone function is not used.
Note
• When HFP is set to OFF, the indicators related to Hands-free phone
(c battery quantity, i signal strength and h message) will not
be displayed.

BLUETOOTH Audio setting (AUDIO)

ON:
Select when you want to use BLUETOOTH Audio function.
OFF:
BLUETOOTH Audio function is not used.
24
-EN
*1 *1
 SEARCH DEV 
*2 *2
 PB UPDATE  BT MENU
*2 *2
 SEV NAME  SPEAKER SL
*1

Setting the BLUETOOTH Device

Select one of 3 connected BLUETOOTH compatible devices that you
previously registered.
 Setting item: PAIRED DEV
1
Turn the Rotary encoder to select a BLUETOOTH
*2
compatible device you want to use (you want to change
*2
connection) and then press ENTER.
2
Turn the Rotary encoder to select "CONNECT" to connect
the selected device.
The connected device is marked with "l". Select "DISCONNECT"
to disconnect this device. Select "CLEAR" when you want to clear
the device from the device list.
Notes
• If the connection is successfully changed, "CONNECTED" is displayed
for 2 seconds and the  indicator lights up, then the display returns to
the SETUP screen.
• If a mobile phone is connected to this unit successfully, the c
indicator lights up to show the battery quantity of the connected mobile
phone. The j indicator lights up when the battery quantity is in
middle level, and it blinks in low level.
• Indicator i (Signal Strength):
The indicator will display the current signal strength of mobile phone.
The indicator blinks when the signal of the connected mobile phone is
weak.
• Depending on the connected mobile phone, the c (battery
quantity), i (signal strength) and h (message) indicators may not be
displayed.
• If all the 3 positions have been registered, you cannot register the 4th
device. To register another device, you need to delete one of the devices
from position 1 to 3 first.

Setting the Visible Mode

You can set whether this unit can be recognised or not from a
BLUETOOTH compatible device. Normally set this to VISI M ON.
 Setting item: VISIBLE M
Setting contents:
VISI M ON (Initial setting) / VISI M OFF
VISI M ON:
Enable recognition of this unit from the BLUETOOTH compatible
device.
VISI M OFF:
Disable recognition of this unit from the BLUETOOTH compatible
device.
Pairing a BLUETOOTH Device from the
unit
The BLUETOOTH device is used when a connectable BLUETOOTH
compatible device is searched and connected to this unit, or when a new
BLUETOOTH compatible device is registered.
 Setting item: SEARCH DEV
1
When SEARCH DEV is selected, and "SEARCHING" is
displayed, the search gets started.
Note
• The "SEARCHING" operation can be stopped by pressing .
2
Turn the Rotary encoder to select the name of the device
to be connected from the Device Search list and then
press ENTER.