Specifications - Marantz CD6004 Owner's Manual
Marantz - cd player
Hide thumbs
Also See for CD6004:
- Owner's manual (38 pages) ,
- Specification (2 pages) ,
- Product information (1 page)
Table of Contents
Advertisement
ENGLISH
Problem
Cause
Sound cannot be heard
Models prior to 5th generation
even when an iPod is
iPods are not supported.
connected.
The amplifier and speakers are
not connected correctly.
The amplifier's function or
selector switch is not set to
"CD" or "AUX" or such (to
whatever you have connected
this unit to).
The amplifier's volume control
is set at the minimum level.
It takes time for USB
When connecting a high-
memory device to be
capacity USB memory device,
read.
it will take time to read
depending on its capacity.
Several minutes may be
required for reading when
using a high-capacity device.
There is no sound output
The "USB OUT" setting is set
from this unit when
to "2 Digital".
music files stored on a
USB memory device or
iPod are played.
GRemote controlH
Problem
Cause
Remote control
The distance between this unit
operation is not
and the remote control is too
possible.
great.
There is an obstacle between
this unit and the remote
control.
The remote control's batteries
are dead.
The remote control sensor is
being subjected to strong light.
The switch on the back of the
REMOTE CONTROL is on
"EXTERNAL".
29
29
Corrective action
Page
For details, see "Supported
14
iPod Models".
Connect the cables correctly.
14
(See the instruction manual
for the amplifier.)
Switch the amplifier's
–
function or selector switch
to "CD" or "AUX" or such
(to whatever you have
connected this unit to).
(See the instruction manual
for the amplifier.)
Adjust the amplifier volume.
–
(See the instruction manual
for the amplifier.)
Wait until reading is
–
completed.
Change the "USB OUT"
20
setting to "1 Analog".
Corrective action
Page
Move closer to this unit, and
4
operate the remote control
within the operating range.
Remove the obstacle.
4
Replace all batteries with
4
new ones.
Move so that the remote
4
control sensor is not
subjected to strong light.
When using this unit
14
independently, set the
switch to "INTERNAL".
Specifications
n Audio performance
Analog output
Channels:
2 channels
Playable frequency range:
2 Hz – 20 kHz
Playable frequency response:
2 Hz – 20 kHz
S/N:
110 dB
Dynamic range:
100 dB
Harmonic distortion:
0.002 % (1 kHz)
Wow & flutter:
Crystal accuracy
Output level
Signal type:
2.2 V RMS stereo
Headphone output:
28 mW/32 Ω (variable maximum)
Digital output
output level (cinch JACK):
0.5 Vp-p (75 Ω)
output level (optical):
-19 dBm
Optical Readout System
Laser:
AlGaAs
Wave length:
780 nm
Signal type:
16-bit linear PCM
Sampling frequency:
44.1 kHz
n General
Power supply:
AC 120 V, 60 Hz
Power consumption:
32 W
Standby: 0.3 W or less
Operating temperatures:
+5 ˚C – +35 ˚C
Operating humidity:
5 – 90 % (without dew)
z For purposes of improvement, specifications and design are subject to change without notice.
Advertisement
Table of Contents
