Basic Connections; Preparations; Connecting Cables; Analog Connection - Marantz CD6004 Owner's Manual

ENGLISH

Basic connections

This chapter explains how to connect the analog device (amp)
and power cord.
For other connections, see the sections below.
n USB memory device/iPod connection (vpage 14)
n Remote control connection (vpage 14)
NOTE
Do not plug in the power cord until all connections have been
completed.
When making connections, also refer to the owner's manual of the
other components.
Insert the plugs securely. Loose connections will result in the
generation of noise.
Be sure to connect the left and right channels properly (left with
left, right with right).
Be sure to connect the input and output properly.
Do not bundle power cords together with connection cables.
Doing so can result in humming or noise.
Do not connect the unit to the PHONO input connectors on the
amplifier.

Preparations

Connecting cables

Select the cables according to the equipment being connected.
Audio cables
Analog connections (stereo)
(White)
L
(Red)
R
Audio cable (supplied)
7 7

Analog connection

L
R

Connecting the power cord

Amplifier
Do not plug in the power cord until all connections have been
completed.
L R
Signal flow
L
NOTE
R
Insert the plugs securely. Loose connections will result in the
generation of noise.
Do not unplug the power cord while the unit is operating.
Do not use a power cord other than the cord supplied with this unit.
To household power outlet
(AC 120 V, 60 Hz)
Power cord
(supplied)