Marantz CD6004 Owner's Manual page 27

n Range Spec (Playback range selection)
You can set whether to play all of the files on the USB memory
device, or just the files within a folder during playback.
1
[ 8
Select "USB Setup=>" using
[ENTER]
press .
2
8
[
Select "Range Spec=>" using
[ENTER]
press .
3
Select the range you want to playback using
9
[ ] [ENTER]
and , and press .
GSelectable itemsH
1 All Plays back all of the files on the USB memory device.
2 Folder Plays back the files in the selected folder.
4
[MENU]
Press .
The settings are saved, and the display returns to normal.
n Resume (Resume playback settings)
You can set whether to record the place where playback is stopped.
When resume playback is set to on, this unit starts USB memory
device playback from the start of the file that was previously being
] [ 9 ]
played.
and , and
1
Select "USB Setup=>" using
9
] [ ]
[ENTER]
and , and
press
2
Select "Resume=>" using
[ 8 ]
[ENTER]
press
3
Select "1 Off" or "2 On" for the resume playback
settings using
GSelectable itemsH
Resume playback is not set.
1 Off
2 On Resume playback is set.
4
[MENU]
Press
The settings are saved, and the display returns to normal.
NOTE
Resume playback cannot be used if
memory device.
3
Press to pause the track. Even if the input source is changed or
the unit power is switched off, when the USB memory device is
played again, playback starts from the start of the track that was
previously being played back.
Resume playback only works when an identical USB memory device
is inserted. If another USB memory device is inserted, the unit will
start playing from the first file.
The unit may not play your desired file if files have been added to or
deleted from the identical USB memory device.
Playback will be resumed from the beginning of the current file.
Performing menu settings
[ 8 ] [ 9 ]
and , and
.
[ 8 ] [ 9 ]
and , and
.
8 9
[ ] [ ] [ENTER]
and , and press .
.
2
is pressed to stop the USB
ENGLISH
24 24