Restoring All The Settings To The Factory Default Settings - Pioneer BDP-150 Operating Instructions Manual

5 Select and set Start.
07
Press ENTER.
6 Downloading of the software start.
The software download status is displayed on the screen.
• Depending on the Internet connection conditions,
software downloading may take a certain period of
time.
7 Updating starts.
• Software updating may take a certain period of time.
8 Updating completes.
This unit automatically restarts.
 Updating using a USB flash drive/
disc
Note
• When an update file is provided on the Pioneer
website, use your computer to download it onto a
USB flash drive or disc. Carefully read the
instructions on downloading update files provided on
the Pioneer website.
• Store the update file in the root directory of the USB
flash drive or disc. Do not store it within a folder.
• Do not put any files other than the update file on the
USB flash drive or disc.
• To update using a disc, use a CD-R or CD-RW disc.
• The player supports USB flash drives formatted in
FAT32/16. When formatting a USB flash drive on your
computer, do so with the settings below.
– File system: FAT32
– Allocation unit size: Default allocation size
• Only store the most recent update file on the USB
flash drive or disc.
• Do not use a USB extension cable to connect a USB
flash drive to the player. Using a USB extension cable
may prevent the player from performing correctly.
• Steps 1 to are the operations performed by the user.
5
• Steps 6 to are the operations performed
7
(automatically) by the player (they are intended to
update the software).
1 Plug in the USB flash drive or load the disc on
which the update file is stored.
2 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
3 Select and set Initial Setup.
Use / to select, then press ENTER.
40
En
Select and set Options  Update  Disc or USB
4
Storage  Start.
Use / to select, then press ENTER.
5 Select and set Yes.
Use /// to select Yes, then press ENTER.
6 Updating starts.
• Software updating may take a certain period of time.
7 Updating completes.
Restoring all the settings to
the factory default settings
1 Check that the player's power is turned on.
2 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
3 Select and set Initial Setup.
Use / to select, then press ENTER.
Select and set Options  Load Default  Next
4
Screen.
Use / to select, then press ENTER.
5 Select and set OK.
Use / to select, then press ENTER.
Note
• After restoring all the settings to the factory default
settings, use Setup Navigator to reset the player
(page 20).