Information; Input Source Information Display; Input; System - Panasonic PT-LX30HU Operating Instructions Manual

Information

Select [Information] from the Main Menu (see
"Navigating through the menu" on page 36),
then select the item from the sub-menu.

Remote Control

Input Source Information
Display
The [Information] Menu is used for checking the
status of the image signal being projected and the
operation of the projector.
You can also Press the <INFO.> button on the remote
control to display the [Information] menu.

Input

J
The selected [input source] is displayed.

System

J
The selected system is displayed.

H-sync freq.

J
The selected [H-sync freq.] is displayed.
The horizontal frequency of the input signal is
displayed in KHz, or - - - KHz when no signal.

V-sync freq.

J
The selected [V-sync freq.] is displayed.
The vertical frequency of the input signal is displayed
in Hz, or - - - Hz when no signal. Numbers of Hz
doubles when during Interlace.

Screen

J
The selected Screen size is displayed.

Language

J
The selected language is displayed.
Control Panel

Lamp power

J
The selected lamp mode is displayed.

Lamp runtime

J
The cumulative lamp operating time is displayed.

Power management

J
[Off ], [ Ready] or [Shut down], and [Timer] are
displayed.

Key lock

J
The selected Key lock icon is displayed.

PIN code lock

J
[Off ], [On 1] or [On 2] is displayed.
Remote control
J
The selected remote control code is displayed.

Serial number

J
The serial number of the projector is displayed.
The serial number is used to service the projector.
Information
59
ENGLISH -