Using The P-Timer Button; Using The Lamp Button; Using The D.zoom Buttons; Controlling The Volume Of The Speaker - Panasonic PT-LX30HU Operating Instructions Manual

Using the P-TIMER button

Press the <P-TIMER> button on the remote control to
operate the [Count up/Count down] function.
Button
Press <P-TIMER> button on the remote
control.
Note
To stop the count time, press the <P-TIMER> button.
z
To cancel the [P-timer] function, press and hold the
<P-TIMER> button. ( Æ page 55)

Using the LAMP button

This function allows you to select the lamp mode for
changing the brightness on the screen.
Button
Press <LAMP> button on the remote
control.
Note
For details, see "Lamp Power" of "Setting" under Main
z
Æ
menu. ( page 56)

Using the D.ZOOM buttons

This function allows you to enter to the Digital zoom
+/– mode.
Buttons
Press <D.ZOOM+/-> buttons on the
remote control.
Note
For details, see "Screen" of Main menu. (
z
Basic operations by using the remote control
You can control the volume of the projector's speaker.
Press the <VOLUME+/–>buttons on the top control
or on the remote control to adjust the volume. The
volume dialog box appears on the screen for a few
seconds.
z
This function allows you to select a desired image
mode of the screen.
Press <IMAGE> button on the remote control to select
the desired image mode among [Dynamic], [Standard],
[Real], [Cinema], [Blackboard (Green)], [Colorboard],
[Image 1], [Image 2], [Image 3] and [Image 4].
Press this button on the remote control to select [On]
to temporarily turn off the sound.
Press <MUTE> button on the remote
control.
z
Æ page 48)
Controlling the volume of the
speaker
Buttons
Note
For details, see "Volume" of "Sound" under Main menu.
Æ
( page 51)

Using the IMAGE button

Button

Using the MUTE button

Button
Note
To turn the sound back on, press this button again or
press the <VOLUME+/–> buttons. (
Æ
page 51)
35
ENGLISH -