Basic Operations Using The Remote Control; Using The Av Mute Function; Using The Freeze Function; Switching The Input Signal - Panasonic PT-FX400U Operating Instructions Manual

Basic operations using the remote control

Using the AV MUTE function

If the projector is not used for a certain period of time
during the meeting intermission, for example, an
AV MUTE mode is available that allows the user to
mute the sound and to hide images temporarily.
button
1 ) Press <AV MUTE> button on the
remote control.
The image disappears and the sound is muted.
z
2 ) Press <AV MUTE> button again.
The image and the sound resume.
z
32
- ENGLISH

Using the FREEZE function

You can freeze the projected image and stop the
sound temporarily, regardless of the playing condition
of the connected device.
button
1 ) Press <FREEZE> button on the remote
control.
The image freezes and the sound is muted.
z
2 ) Press <FREEZE> button again.
The image unfreezes and the sound resumes.
z
Note
"FREEZE" is displayed on the screen while the freeze
z
function is enabled.

Switching the input signal

You can switch the input signals to project.
Press <INPUT SELECT> (<COMPUTER>,
<DVI-I>, <VIDEO/S-VIDEO>, <NETWORK>,
or <HDMI>) button on the remote control.
COMPUTER Switches to COMPUTER input.
DVI-I Switches to DVI-I input.
VIDEO/S-VIDEO Switches to VIDEO or S-VIDEO.
NETWORK Switches to NETWORK input.
HDMI Switches to HDMI input.
Note
Each press of the <INPUT SELECT> button on the
z
Control Panel of the main unit switches the settings as
shown below. ( Æ page 19)
NETWORK HDMI
VIDEO S-VIDEO
button
DVI-I
COMPUTER