Smart Card Reader; Fan; Heat Sink; Keyboard - HP ProBook 6465b Maintenance And Service Manual

Smart card reader

Description
Smart card reader assembly
Before removing the smart card reader assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Bottom door (see
b. Hard drive (see
c. Optical drive (see
d. Fan (see
e. Heat sink (see
f. Keyboard (see
g. Bottom cover (see
Remove the smart card reader assembly:
1. Position the computer upside-down with the front toward you.
92 Chapter 4 Removal and replacement procedures
Battery on page
Bottom door on page
Hard drive on page
Optical drive on page
Fan on page 63)
Heat sink on page
Keyboard on page
Bottom cover from top cover on page
41).
48).
53)
49)
64)
67)
Spare part number
654823-001
70)