When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
SIM (see
●
Memory module (see
●
WLAN module (see
●
WWAN module (see
●
●
Processor (see
Remove the system board:
1.
Position the computer right-side up, with the front toward you.
2.
Disconnect the following cables from the system board (as necessary):
●
(1): Antenna cables from the rubber clamp
●
(2): Lid sensor board cable
●
(3): Display cable
●
(4): Webcam cable
●
(5): Fingerprint reader cable
●
(6): RTC battery cable
90
Chapter 4 Removal and replacement procedures
63)
SIM on page
42)
Memory modules on page
WLAN module on page
WWAN module on page
Processor on page
64)
67)
55)
59)
57)
62)
66)
70)