Upgrade Bay - HP ProBook 6465b Maintenance And Service Manual
Hp probook 6465b notebook pc - maintenance and service guide
Hide thumbs
Also See for ProBook 6465b:
- Specification (42 pages) ,
- Reference manual (96 pages) ,
- Getting started (70 pages)
Table of Contents
Advertisement
Upgrade bay
Description
Upgrade Bay – Hard Drive Adapter Kit
500-GB, 7200-rpm hard drive
Before removing a drive from the upgrade bay, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the bottom door (see
Remove the drive from the upgrade bay:
1.
Position the computer upside-down with the right side toward you.
2.
Remove the four Phillips PM2.0×4.0 screws that secure the drive assembly into the upgrade
bay.
3.
Loosen the captive Phillips screw that secures the drive in the bay (1).
4.
Push the drive tab (2) to release the drive from the computer.
Battery on page
41).
Bottom door on page
48).
Component replacement procedures
Spare part number
643921-001
656424-001
51
Advertisement
Table of Contents
