File Menu; Security Menu - HP ProBook 5220m - Notebook PC User Manual

File menu

Select
System Information
Set System Date and Time
System Diagnostic
Restore Defaults
Reset BIOS security to factory default
Ignore Changes and Exit
Save Changes and Exit

Security menu

NOTE: Some of the menu items listed in this section may not be supported by your computer.
Select
Setup BIOS Administrator Password
To do this
●
View identification information for the computer and the
batteries in the system.
●
View specification information for the processor, memory
size, system ROM, video revision, keyboard controller
version, and wireless identification numbers.
Set or change the date and time on the computer.
Display the following information:
● System Information
◦
Identification information for the computer and the
batteries in the system.
◦
Specification information for the processor, cache
and memory size, system ROM, video revision, and
keyboard controller version.
● Start-up Test: verifies the system components needed for
starting the computer.
●
Run-In Test: runs a comprehensive check on system
memory.
●
Hard Disk Test: runs a comprehensive self-test on any
hard drive in the system.
● Memory Test: runs a comprehensive test on any memory
installed in the computer.
●
Battery Test: runs a comprehensive test on any batteries
installed in the computer.
● Error Log: displays a log file if any errors have occurred.
Replace the configuration settings in Computer Setup with the
original factory settings. (Hard drive mode, password settings,
and security settings are not changed when you restore the
factory settings.)
Resets password to the factory default in case of a forgotten
password.
Cancel any changes entered during the current session. Then
exit and restart the computer.
Save any changes entered during the current session. Then
exit and restart the computer. Your changes go into effect
when the computer restarts.
To do this
Set up a BIOS administrator password.
Computer Setup menus 117