Removing Automatic DriveLock protection
To remove DriveLock protection in Computer Setup, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2.
Press
3.
Use a pointing device or the arrow keys to select Security > Automatic DriveLock, and then press
enter.
4.
Use a pointing device or the arrow keys to select an internal hard drive, and then press enter.
5.
Use a pointing device or the arrow keys to select Disable protection.
6.
To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the
screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
138 Chapter 10 Security
f10
to enter BIOS Setup.
esc
while the "Press the ESC key for Startup Menu"