Select
User Management > Create a New BIOS User Account
(requires a BIOS administrator password)
Password Policy (requires a BIOS administrator password)
HP SpareKey
Always Prompt for HP SpareKey Enrollment
Fingerprint Reset on Reboot (If Present)
Change Password
HP SpareKey Enrollment
Anti Theft > AT-p (select models only)
DriveLock Password
Automatic DriveLock
Disk Sanitizer
System IDs
System Configuration menu
NOTE:
Some of the listed System Configuration options may not be supported by your computer.
Select
Language
162 Chapter 13 Computer Setup
To do this
●
Select from a list of BIOS users.
●
Select from a list of ProtectTools users.
Revise password policy criteria.
Enable/disable HP SpareKey (enabled by default).
Enable/disable HP SpareKey enrollment (enabled by default).
Reset/clear the fingerprint reader ownership (select models
only; disabled by default).
Enter, change, or delete a BIOS administrator password.
Enroll or reset HP SpareKey, which is a set of security
questions and answers used if you forget your password.
Enable/disable Anti-Theft Protection.
●
Enable/disable DriveLock on any computer hard drive
(enabled by default).
●
Change a DriveLock user password or master password.
NOTE:
DriveLock settings are accessible only when you
enter Computer Setup by turning on (not restarting) the
computer.
Enable/disable Automatic DriveLock support (disabled by
default).
Run Disk Sanitizer to destroy all existing data on the primary
hard drive or the drive in the upgrade bay.
CAUTION:
If you run Disk Sanitizer, the data on the selected
drive is destroyed permanently.
Enter a user-defined computer asset tracking number and
ownership tag.
To do this
Change the Computer Setup language.