Insufficient Memory To Collate Job; Insufficient Memory For Flash Memory Defragment Operation; Memory Full - Lexmark W850 User Manual

Troubleshooting

37 Insufficient memory to collate job

Try one or more of the following:
•
Press the up or down arrow button until Continue appears, and then press
already stored and begin collating the rest of the print job.
• Cancel the current print job. Press the up or down arrow button until Cancel job appears, and then press
.

37 Insufficient memory for Flash Memory Defragment operation

Try one or more of the following:
•
Press the up or down arrow button until Continue appears, and then press
and continue printing.
•
Delete fonts, macros, and other data in printer memory.
• Install additional printer memory.
37 Insufficient memory, some held jobs were deleted
The printer deleted some held jobs in order to process current jobs.
Press the up or down arrow button until Continue appears, and then press
37 Insufficient memory, some held jobs will not be restored
The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Press the up or down arrow button until Continue appears, and then press

38 Memory full

Try one or more of the following:
•
Press the up or down arrow button until Continue appears, and then press
•
Cancel the current print job. Press the up or down arrow button until Cancel job appears, and then press
.
• Install additional printer memory.
to print the portion of the job
to stop the defragment process
to clear the message.
to clear the message.
to clear the message.
146