Loading The Multipurpose Feeder - Lexmark W850 User Manual

Loading paper and specialty media
4
Load paper in the tray with the print side up.
Note: Make sure the paper is below the maximum fill line on the rear guide. Overloading may cause jams.
5
Insert the tray.

Loading the multipurpose feeder

The multipurpose feeder can hold several sizes and types of print media, such as transparencies, labels, card stock, and
envelopes. It can be used for single-page or manual printing or as an additional tray.
The multipurpose feeder can hold approximately:
•
100 sheets of 75 g/m
• 10 envelopes
•
75 transparencies
The multipurpose feeder accepts paper or specialty media within the following dimensions:
•
Width—89 mm (3.5 in.) to 297 mm (11.7 in.)
• Length—98.4 mm (3.8 in.) to 431.8 mm (17 in.)
Notes:
– Maximum width and length can be applied only to short-edge feeding.
2
(20 lb) paper
50