HP Xw6200 - Workstation - 2 GB RAM Installation Manual page 7

Sliding rack mount kit

Hide thumbs Also See for Xw6200 - Workstation - 2 GB RAM:

Installing on round hole and square hole racks

These instructions apply to racks such as standard HP racks.

NOTE:

This product must be mounted in the middle of a 4U space. Use the Mounting Aid at the end

of this document to determine a 4U space and mark the center.

Engage the three pins on the rear slide mounting bracket in the holes in the rear rack column, and

slide forward to lock in place (1).

Engage the three pins on the front slide mounting bracket in the holes in the front rack column, and

slide backward to lock in place (2).

NOTE:

Repeat this procedure for the second slide.

Release rear bracket if it must be repositioned (3).

Release front bracket if it must be repositioned (4).

Figure 4

Continue with Step 4—Mounting into a rack.

ENWW

The slide telescopes to accomplish this task.

Installing on round/square hole racks

Step 3—Installing rails to the rack

Table of Contents

Xw6400 Xw6600