HP Xw460c - ProLiant - Blade Workstation User Manual page 73

Controlling Settings on Linux and HP-UX
Sender GUI
By default, the Sender GUI automatically starts on Linux and HP-UX when the
Sender process starts. The Sender GUI displays with the HP Remote Graphics
Software icon on the desktop. By right clicking on the icon, the user can select
one of the following options:
"Remote Keyboard/Mouse --> Enable or Disable" - If "Disable" is
selected, all non-primary
the user logged into the desktop of the remote computer. If no one is logged
into the desktop of the remote computer, then all connections are non-
primary.) users are in "view-only" mode. Only the primary user, the user that
is logged into the desktop, will control the remote desktop remotely using the
Receiver. If "Enable" is selected, all users connected to the Sender can
interact with the remote desktop. All keyboard and mouse activity will be
injected into the Sender allowing non-primary users control of the remote
desktop.
"Disconnect --> Non-primary Users or All Users" – disconnects
receiver sessions for either non-primary users or all users.
"Help" displays the Remote Graphics Help system.
"About" displays Remote Graphics program information.
It is possible to disable the GUI from automatically starting. See Installing the
Sender for more details.
Starting & Stopping
Using Remote Graphics Software
(A user of a RGS connection that does not match
65