HP Xw460c - ProLiant - Blade Workstation User Manual page 59

When the Receiver uses Directory Mode or Enterprise Service Mode with multiple
Senders specified, the Select sender drop down box manages which system
receives the active Remote USB connection. The example above shows a RGS
Receiver setup for directory mode using the Directory File "directory.txt" and the
system bl122 selected for Remote USB devices at the next connection.
NOTE: In Directory Mode or Enterprise Service Mode, Remote USB requires selection
of one Sender system before connecting to any systems. Remote USB can only be
enabled to one Sender at a time. During an active connection, if users want to
change their Remote USB devices to another Sender system, they must
1. disconnect all systems using the "Disconnect All" button
2. use the "Select sender" box to select a new Remote USB system
3. reconnect to their remote systems using the "Connect All" button.
During device discovery, the new sender system will report the USB connection as a
hotplug event for the Remote USB devices.
Network Options:
Using Remote Graphics Software
51