HP Xw460c - ProLiant - Blade Workstation User Manual page 58

HP Remote Graphics 4.2.0 User's Guide
High specifies a sampling rate of 44 KHz which equivalent to CD quality
audio.
Higher quality settings (sampling rates) require more network bandwidth and can
impact the performance of HP Remote Graphics especially over bandwidth-
constrained networks.
USB Options:
Remote USB is only supported on a HP Blade Workstation Client and a HP Blade
Workstation sender. See System Requirements for further details.
HP Remote Graphics Software supports a Remote USB capability. This allows a user
to connect any number of USB devices to a local RGS Receiver system and have the
devices appear connected to the RGS Sender system.
The toggle button labeled Enable Remote USB selectively enables or disables
Remote USB capability. When enabled, USB devices plugged into the local system
appear to the remote system as locally attached devices. Remote USB can
dynamically enable or disable USB connections while connected to a Sender system.
Remote USB supports hotplug events, so it is not necessary to disable Remote USB
before plugging or unplugging USB devices.
50