HP XM600 - Kayak - 128 MB RAM Technical Reference Manual page 128

6 Tests and Error Messages
Error Message Summary
Code #
0400h CD-ROM test failure
0401h CD-ROM not detected (but configured in CMOS)
0500h General failure on HDD onboard primary ctrl
0501h General failure on HDD onboard secondary ctrl
0510h HDD # 0 self-test error
0511h HDD # 1 self-test error
0512h HDD # 2 self-test error
0513h HDD # 3 self-test error
0520h HDD # 0 not detected (but configured in CMOS)
0521h HDD # 1 not detected (but configured in CMOS)
0522h HDD # 2 not detected (but configured in CMOS)
0523h HDD # 3 not detected (but configured in CMOS)
0530h Found a drive on slave connector only (primary)
0531h Found a drive on slave connector only (secondary)
0540h Conflict on hard disk controller
0600h Found less video memory than configured in CMOS
0700h Found less DRAM memory than at previous boot
0711h Defective SIMM (module 1, bank 1)
0712h Defective SIMM (module 2, bank 1)
0721h Defective SIMM (module 1, bank 2)
0722h Defective SIMM (module 2, bank 2)
0731h Defective SIMM (module 1, bank 3)
0732h Defective SIMM (module 2, bank 3)
0800h Found lower cache size than configured
0801h Cache self-test failure
0A00h Plug and Play video auto-setting failure (DDC hang)
128
Cause / Symptom Short message (US)
CD-ROM Error
CD-ROM Error
IDE Device Error
IDE Device Error
IDE Device # 0 Error
IDE Device # 1 Error
IDE Device # 2 Error
IDE Device # 3 Error
IDE Device # 0 Error
IDE Device # 1 Error
IDE Device # 2 Error
IDE Device # 3 Error
IDE Device Error
IDE Device Error
IDE Device Error
Video Memory Error
System Memory Error
System Memory Error
System Memory Error
System Memory Error
System Memory Error
System Memory Error
System Memory Error
System Cache Error
System Cache Error
DDC Video Error