HP XM600 - Kayak - 128 MB RAM Technical Reference Manual page 10

1 System Overview
HP Kayak XM600 PC Workstation Overview
Feature
Chipset
Super I/O Chip
BIOS
)
(Basic Input/Output System
Firmware - BIOS
HP MaxiLife Utility
(available on all models)
Operating System
Main Memory
10
Desktop
Intel® Chipset (I820) including Memory Controller Hub (MCH) Host Bridge,
Input/Output Controller Hub (ICH) for input/output sub-system.
NS 87364.
Based on Phoenix core including:
4 M/bits of flash memory.
•
Support for PCI 2.2 Specification.
•
Support for RIMM or DIMM memory modules.
•
Flash EEprom: Intel's Firmware hub concept.
Hardware monitoring utility that
monitors system components via the
2
I C bus.
Most models are preloaded with Windows NT® 4.0. There are some models
that are preloaded with MS-DOS.
Models include either:
Two RIMM sockets supporting RDRAM memory modules. In a single
•
memory configuration, empty sockets must contain:
RIMM 2, a "RDRAM Continuity Module".
SDRAM Memory Expansion Card socket, a "RDRAM Terminator
Module".
Models are supplied with non-ECC RDRAM modules.
Two DIMM sockets supporting SDRAM 100 MHz memory modules. Models
•
are supplied with non-ECC SDRAM modules. A Memory Expansion Card is
supplied uniquely with SDRAM models and is installed in the pre-defined
socket on the system board.
Up-to-date memory upgrades are listed on the HP PC Accessories website at:
http://www.hp.com/go/pcaccessories
Description
Minitower
Hardware monitoring utility that
monitors system components via the
2
I C bus and a LCD status panel.