Installing Opengl; Read This Entire Procedure; Install Opengl - HP Workstation zx2000 Implementation Manual

installation and setup

installing OpenGL

Installing the software involves the following steps:

1. Read this entire procedure.

2. Install OpenGL.

3. Check log file.
4. Verify the product.
Each step is described on the subsequent sections.
1. read this entire procedure
Read all of this procedure to ensure the proper installation of your OpenGL product.
2. install OpenGL
After you have installed HP-UX, you can install the OpenGL programming environment.
The X Server is bundled with the HP-UX 11.23 Technical Computing Operating Environment
(TCOE).
If your system is Instantly Ignited, your OpenGL product is already installed. To verify that the
OpenGL developer's programming environment has been installed on your system, read the
section "Verify that OpenGL is on Your Workstation" above.
If OpenGL is installed, you are done with this section. If OpenGL is not installed, execute this
command (as root):
/usr/sbin/swinstall
...and follow the installation instructions provided in the document Managing HP-UX Software
with SD-UX located at
to install.
The OpenGL development and run time environment product includes the filesets shown in the
GraphicsOpenGL Run Time Environment Filesets for 11.23
filesets, execute:
/usr/sbin/swlist -l fileset GraphicsOpenGL
GraphicsOpenGL Run Time Environment Filesets for 11.23
GraphicsOpenGL Fileset contains
COMMON-RUN
OPENGL-DK
OPENGL-PA
OPENGL-RUN
2–2
http://docs.hp.com
. OpenGLRunKit and OpenGLDevKit are the products
Shared Libraries
OpenGL Developer's Kit
OpenGL PA Shared Libraries and Executables
OpenGL Run Time Support Files
table that follows. To list these
OpenGL implementation guide