Installation And Setup; Verification Instructions; Is Your System Software Preloaded With Instant Ignition; Verify That Opengl Is On Your Workstation - HP Workstation zx2000 Implementation Manual

If you are setting up a new workstation, all software is preloaded for you if you purchased the
Instant Ignition option. A subsequent section will explain how to determine if OpenGL has been
installed. If you did not order Instant Ignition, then you will need to install the OpenGL filesets.
For HP-UX 11.X, the box containing the "HP-UX 11.0 Install and Core OS" CD-ROM will also
hold a second CD-ROM entitled "HP-UX 11.0 Core Operating Systems Options." The OpenGL
run time and developer's products are both available on the HP-UX 11.X Core Operating
Systems Options CD-ROM in the "Graphics and Technical Computing Software" bundle.

verification instructions

This section provides you with the necessary information for determining if your OpenGL
product has been installed.

is your system software preloaded with instant ignition?

Your workstation is preloaded with software, which may include OpenGL, if it was ordered with
the Instant Ignition option. A label attached to the workstation in its shipping carton confirms the
workstation is preloaded:
This product contains preloaded software.
Do not initialize internal hard disk drive.

verify that OpenGL is on your workstation

To verify that OpenGL is installed correctly on your system, execute:
/usr/sbin/swlist -l product
This gives you a list of all of the products on the system, and in that product list you will see lines
similar to the following if HP OpenGL has been installed on your system.
OpenGLRun
Developers Kit
If OpenGL is not preloaded, you will need to install it by following the steps in the subsequent
sections.
OpenGL implementation guide
Important
B.11.23.01 HP-UX OpenGL Run Time Environment and

installation and setup

2
2–1