Fsupload Command - HP Color LaserJet 5500 Technical Reference Manual

FSUPLOAD
Command
Syntax:
Response Syntax:
Parameters:
9-12 PJL File System Commands
The FSUPLOAD command uploads a file, or a part of a file,
from the printer file system to the host.
@PJL FSUPLOAD NAME = " pathname "
~OFFSET=<number> SIZE=<number>[<CR>]<LF>
If the pathname is valid:
@PJL FSUPLOAD FORMAT:BINARY
~NAME = " pathname " OFFSET=< number >
~SIZE=< number ><CR><LF>
<SIZE bytes of file data >
<FF>
If the pathname is invalid:
@PJL FSUPLOAD NAME = " pathname "<CR><LF>
FILEERROR=< number ><CR><LF>
<FF>
Parameter
NAME="pathname"
OFFSET=integer
SIZE=integer
NAME = "pathname" — For the FSUPLOAD command,
the variable pathname must be a file name (not a
directory). For a complete description of the NAME
parameter, see NAME = "pathname" on pages 9-2 to 9-3.
OFFSET = integer — The offset variable specifies the
offset, from the beginning of the file, indicating the point
to begin uploading.
Functional Range
Roman-8 characters
01 thru 255
31
0 to 2 – 1
31
0 to 2 – 1
Default
N/A
N/A
N/A