Installing The Top Cover - Toshiba Satellite L300 Maintenance Manual

4.7 Top Cover
Latch
Top cover
Touch pad
board flat cable

Installing the Top Cover

Install the top cover with the display assembly according to the following procedures and
Figures 4-12, 4-13.
1. Seat the top cover, adjusting its position.
2. Secure the top cover with five M2.5x6 black flat-head screws.
3. Secure the following 15 latches on the top cover, in that order:
- Four Left latches
- Four right latches
- Three front latches
- Four bottom latches
4. Connect the touch pad board flat cables to CN8 on the system board.
5. Connect the speaker cable to CN9 on the system board.
6. Turn the computer upside down and secure it with the following 14 screws:
- Eleven M2.5x6 black flat head screws and three M2x4 black flat head screws.
Satellite L300D / L305D/Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual
M2 5x6 black flat head screw .
Speakers cable
CN8
CN9
Figure 4-13 Removing the top cover
4 Replacement Procedures
4-29