4 Replacement Procedures
4.15 CCD Board and MIC
Removing the CCD Board and MIC
Remove the FL inverter board according to the following procedures and Figure 4-29.
1. Remove the CCD module with CCD cable from display rear cover.
2. Disconnect the CCD cable from the CCD module connector.
Display rear cover
Figure 4-29 Removing the CCD board and MIC
3. Lift the MIC from the display rear cover.
4-48
Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual
4.15 CCD Board and MIC
MIC cable
CCD module
CCD cable