Toshiba Satellite L300D Maintenance Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite L300D
  6. Maintenance manual
Toshiba Satellite L300D Maintenance Manual

Toshiba Satellite L300D Maintenance Manual

Hide thumbs Also See for Satellite L300D:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Toshiba Personal Computer
Satellite L300D/L305D
Satellite Pro L300D
EQUIUM L300D
SATEGO L300D
(PSLC8x/PSLC9x)
(PSLCAx/PSLCBx)
Maintenance Manual
TOSHIBA CORPORATION
S/ No
Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D
Maintenance Manual
Downloaded from LpManual.com Manuals

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite L300D

Summary of Contents for Toshiba Satellite L300D

  • Page 1 Toshiba Personal Computer Satellite L300D/L305D Satellite Pro L300D EQUIUM L300D SATEGO L300D (PSLC8x/PSLC9x) (PSLCAx/PSLCBx) Maintenance Manual TOSHIBA CORPORATION S/ No Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 2 © 2008 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the information contained herein.
  • Page 3 This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite L300D/L305D / Satellite Pro L300D / EQUIUM L300D / SATEGO L300D, referred to as Satellite L300D/L305D / Satellite Pro L300D / EQUIUM L300D / SATEGO L300D in this manual.
  • Page 4 The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite L300D/L305D / Satellite Pro L300D / EQUIUM L300D / SATEGO L300D system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems.
  • Page 5 Text that you are instructed to type in is shown in the boldface type below: DISKCOPY A: B: The display Text generated by the XXXXX that appears on its display is presented in the type face below: Format complete System transferred Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 6 Procedure 1 Message Check................2-9 Procedure 2 Test Program Check..............2-10 Procedure 3 Replacement Check...............2-10 2.5-inch HDD .......................2-11 Procedure 1 Message Check................2-11 Procedure 2 Partition Check................2-11 Procedure 3 Format Check ................2-12 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 7 Customization Test ........ Error! Bookmark not defined. 3.2.3 Keyboard Layout test ......Error! Bookmark not defined. 3.2.4 Hotkey Test..........Error! Bookmark not defined. 3.2.5 Audio Play Test ........Error! Bookmark not defined. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 8 Peripheral..............Error! Bookmark not defined. 3.11 Error Codes and description ........Error! Bookmark not defined. 3.12 Quick Test Item List ..........63Error! Bookmark not defined. Chapter 4 Replacement Procedures General........................4-1 viii Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 9 Assembling the ODD Bay Module..............4-21 Keyboard.......................4-22 Removing the Keyboard..................4-22 Installing the Keyboard ..................4-23 MDC Module......................4-24 Removing the MDC Module................4-24 Installing the MDC Module ................4-25 Wireless LAN Card ....................4-26 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 10 Installing the LCD Module.................4-47 4.16 CCD board and MIC.....................4-48 Removing the CCD and MIC ................4-48 Installing the CCD and MIC ................4-49 4.17 Speakers........................4-50 Removing the Speakers ..................4-50 Installing the Speakers..................4-50 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 11 USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable ..4-53 Removing USB / CRT / Power Button Board / AC-IN / RJ11 cable....4-53 Installing USB / CRT / Power Button Board / AC-IN / RJ11 cable ....4-54 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 12 Pin Assignments.................... C-1 Appendix D Keyboard Scan/Character Codes..............D-1 Appendix E Key Layout ....................E-1 Appendix F BIOS Rewrite Procedures ................F-1 Appendix G EC/KBC Rewrite Procedures ................ G-1 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 13: Hardware Overview

    Chapter 1 Hardware Overview Downloaded from LpManual.com Manuals...
  • Page 14 1 Hardware Overview Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 15: Table Of Contents

    1.5 DVD Super Multi (+-R Double Layer) ................19 1.6 Power Supply ........................20 1.7 Batteries..........................21 1.1.1 Main Battery ..................21 1.1.2 Battery Charging Control............... 21 1.1.3 RTC Battery................... 22 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 16 Tables Table 1-1 HDD Specifications....................17 Table 1-2 Combo CD-RW/DVD-ROM Drive Specifications ..........18 Table 1-3 DVD Super Multi Drive Specifications..............19 Table 1-4 Battery Specifications....................21 Table 1-5 Quick/Normal Charging Time.................22 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 17: Features

    1 Hardware Overview 1.1 Features The Toshiba Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D is a full size notebook PC based on the mobile AMD Turion64 X2 and Athlon X2 Processors, providing high-speed processing capabilities and advanced features. The computer employs a Lithium Ion battery that allows it to be battery-operated for a longer period of time.
  • Page 18 DVD Super Multi +-R Double Layer with Label Flash drive (BTO) Display The LCD displays available come in the following two types at resolution 1280x800, 262,144 colors: 15.4” WXGA CSV 200nits display 15.4” WXGA Non-CSV 200nits display Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 19 This slot is for your memory card requirements like SD, Mini-SD, SD-IO, MS, MS Pro, MMC and XD Cards to provide memory card read on your computer. Toshiba Pointing Device Toshiba Pointing Device has one kind of Synaptic Touchpad. Sound System Realtek ALC268 integrated audio controller supports multimedia. The sound system...
  • Page 20 HDMI Out Port (BTO) The computer has HDMI Out Port and it supports HDMI V1.3. A HDMI monitor can be connected to HDMI Out Port on the computer. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 21: Figure 1-1 Id Parts Description Placement

    1.1 Features 1 Hardware Overview Figures 1-1/1-2/1-3 and 1-4 show the computer and its system unit configuration, respectively. Figure 1-1 ID Parts Description Placement Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 22: Figure 1-2 Computer Block Diagram

    1 Hardware Overview 1.1 Features Figure 1-2 Computer Block Diagram Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 23: Figure 1-3 System Board Configurations

    1.1 Features 1 Hardware Overview Figure 1-3 System Board Configurations Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 24: System Unit Components

    1 Hardware Overview 1.2 System Unit Components 1.2 System Unit Components Figure 1-4 is Block Diagram of the System Unit. Figure 1-4 System Unit Block Diagram Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 25 − FV00 Free Space: 72KB − FV01 Size: 32KB − FV01 Free Space: 5KB − FV02 Size: 36KB − FV02 Free Space: 3KB − FV03 Size: 52KB − FV03 Free Space: 2KB Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 26 2 Stereo DACs support 16/20/24-bit PCM format for stereo audio playback 2 stereo ADCs support 16/20-bit PCM format for two stereo independent sound inputs 16/20/24-bit S/PDIF-OUT supports 44.1K/48K/88.2K/96K/192KHz sample rate All ADCs support 44.1K/48K/96KHZ sample rate Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 27 − Generating the clock signal required for the system Modem Controller Built-in MDC card with Askey / Foxconn / Lite-On. Functions of modem controller: Digital signal conductor protection Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 28 − IEEE 802.11bg: Standard 54M bps − IEEE 802.11ag: Standard 54M bps − IEEE 802.11agn: Standard 130M bps Frequency Channel − IEEE802.11bg: 2.4GHz − IEEE802.11ag: 2.4GHz / 5.4GHz − IEEE802.11agn: 2.4GHz / 5.4GHz Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 29: Inch Hdd

    500 GB Rotational Speed (RPM) 5400 rpm 4200 rpm 4200 rpm 5400 rpm Height 9.5 mm 12.5 mm 12.5 mm User Data Sectors 625,142,448 781,422,768 976,773,168 Bytes / Sector Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 30: Combo Cd-Rw/Dvd-Rom

    DVD-ROM, DVD-R, DVD-RAM CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo CD, Video CD), Multi-session CD (Photo CD, CD-EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD-RW Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 31: Dvd Super Multi (+-R Double Layer)

    DVD: DVD-VIDEO, DVD-ROM, DVD-R, DVD-RW, DVD-RAM, DVD+R, DVD+-R (Double Layer), DVD+RW. CD-DA, CD-ROM, CD-R, CD-RW, Mixed-CD, HS CD-RW, US CD-RW, Photo CD (Multi-Session), Video CD, CD-Extra (CD+), CD-Text.. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 32: Power Supply

    Monitors the voltage output to the system block (load/logic circuit side). Monitors the voltage, over voltage, input/output current of the battery pack. Monitors the internal temperature of the battery pack. Monitors the supply voltage from the AC adapter. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 33: Batteries

    When the AC adapter is attached, the battery is charged by off-state charge when the system is powered off or by on-state charge when it is powered on. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 34: Rtc Battery

    The charging time exceeds the fixed limit. 1.1.3 RTC Battery The RTC battery provides power to keep the current date, time and other system information in memory while the computer is turned off. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 35: Troubleshooting

    2 Troubleshooting ¡ Chapter 2 Troubleshooting Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 36 Procedure 2 Test Program Check ..............2-18 Procedure 3 Connector Check and Replacement Check.......2-18 LAN ........................2-20 Procedure 1 Test Program Check ..............2-20 Procedure 2 Connector Check and Replacement Check.......2-20 2-ii Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 37 Procedure 1 Test Program Check ..............2-21 Procedure 2 Connector Check and Replacement Check .......2-21 2.11 Cooling Module ....................2-22 Procedure 1 Test Program Check ..............2-22 Procedure 2 Connector Check and Replacement Check .......2-22 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual 2-iii Downloaded from LpManual.com Manuals...
  • Page 38 2 Troubleshooting Figures Figure 2-1 Basic Flowchart....................2-3 Tables Table 2-1 HDD Error Code and Status.................2-13 2-iv Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 39: Outline

    3. Cleaning disk kit (for ODD drive cleaning) 4. Bootable CD 5. Multimeter 6. External monitor 7. Headphone 8. Microphone 9. A-BEX TEST DVD 10. Music CD 11. DVD TSD-1 (TOSHIBA EMI DVD Test Media) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 40: Basic Flowchart

    Make sure the Windows® Vista Home Edition has been installed on the HDD. Any other operating system can cause the computer to malfunction. Make sure any piece of optional equipment has been installed. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 41 Section 2.7 See the previous page to "Password=" displayed ?? delete the password. Follow the HDD diagnostic OS started ?? procedure in Section 2.5 Figure 2-1 Basic Flowchart (1/2) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 42 Identify the test resulting in the Any error detected by the error and perform the appropriate diagnostic program ?? diagnostic procedures The system is normal. Figure 2-1 Basic Flowchart (2/2) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 43 9. If an error is detected by the IEEE 1394 test, follow the IEEE 1394 troubleshooting procedures in section 2.12. 10. If an error is detected by the Fan On/Off test, follow the cooling module troubleshooting procedures in Section 2.13. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 44: Power Supply

    On in Amber Battery being charged On in Green Battery fully charged, with AC adapter connected Blinking in Amber Battery low *1 while driving the computer (at equal intervals) Else Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 45 Make sure the DC IN LED goes on in Green. If it does not, go to Procedure 2. Check 2 Make sure the Battery LED goes on in Amber or Green or Orange. If it does not, go to Procedure 3. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 46: System Board

    Replace the system board with a new one. If the battery pack is still not working properly, perform Check 3. Check 3 Replace the CPU with a new one. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 47: Procedure 1 Message Check

    If any other error message displays, perform Check 3. Check 3 Resume failure and press any key to continue. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 48: Procedure 2 Test Program Check

    The system board, memory, or CPU may be defective. Disassemble the computer following the steps described in Chapter 4 and replace the system board, memory module or CPU with a new one. 2-10 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 49: Inch Hdd

    Check 2 information” from the FDISK menu. If drive C is listed, perform Check 3. If drive C is not listed, return to the FDISK menu and choose the option to Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual 2-11...

  • Page 50: Procedure 3 Format Check

    HDD has been formatted. Format complete If you cannot format the HDD using the test program, go to Procedure 4. 2-12 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 51: Procedure 4 Test Program Check

    Disk Controller Test unexpected interrupt Failed Disk Controller action Test Failed Disk dos not support SMART Disk read attribute threshold error Disk read attribute value error Disk SMART attribute value error Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual 2-13 Downloaded from LpManual.com Manuals...

  • Page 52: Procedure 5 Connector Check And Replacement Check

    Chapter 4. If the problem persists, perform Check 4. Check 4 The CPU may be damaged. Replace it with a new one following the disassembling instructions in Chapter 4. 2-14 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 53: Keyboard

    Check 5. Check 5 The CPU may be faulty. Disassemble the computer following the steps described in Chapter 4 and replace the CPU with a new one. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual 2-15 Downloaded from LpManual.com Manuals...

  • Page 54: Display

    Procedure 3. If there is still an error, perform Check 3. Check 3 The FL may be faulty. Replace it with a new one and return to Procedure 2-16 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 55 The memory may be defective. Replace the memory module with a new one following the steps described in Chapter 4. If the problem persists, perform Check 10. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual 2-17 Downloaded from LpManual.com Manuals...

  • Page 56: Odd (Optical Disk Drive)

    CD in the computer's CD, turn on the computer and run the test. Then insert a test ODD (Toshiba-EMI DVD-ROM TEST DISK TSD-1) into the ODD drive. See Chapter 3 for information on how to perform the test.
  • Page 57 The memory may be defective. Replace the memory module with a new one following the steps described in Chapter 4. If the problem persists, perform Check 3. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual 2-19 Downloaded from LpManual.com Manuals...

  • Page 58: Lan

    Check 3. Check 3 The CPU may be faulty. Disassemble the computer following the steps described in Chapter 4 and replace the CPU with a new one. 2-20 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 59: Audio Test

    Check 5. Check 5 The CPU may be faulty. Disassemble the computer following the steps described in Chapter 4 and replace the CPU with a new one. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual 2-21 Downloaded from LpManual.com Manuals...

  • Page 60: Cooling Module

    Check 4. Check 4 The CPU may be faulty. Disassemble the computer following the steps described in Chapter 4 and replace the CPU with a new one. 2-22 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 61 2.11Cooling Module 2 Troubleshooting Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual 2-23 Downloaded from LpManual.com Manuals...
  • Page 62 Chapter  Diagnostic Programs Downloaded from LpManual.com Manuals...
  • Page 63 3 Diagnostic Programs Chapter  Contents General .......................... 1 Quick Start........................3 3.2.1 Quick Test....................3 3.2.2 Customization Test .................. 3 3.2.3 Keyboard Layout test................7 3.2.4 Hotkey Test....................8 3.2.5 Audio Play Test ..................8 3.2.6 Audio Record Test................... 9 3.2.7 DMI Read ....................
  • Page 64 3 Diagnostic Programs Communication (COMM)................... 55 3.10 Peripheral ........................56 3.11 Error Codes and description..................58 3.12 Quick Test Item List....................63i ¡ ¢ £ ¤ ¤ ¥ ¢ £ ¦ § ¨ ¨ © ¡ ¢ £ ¤ ¤ ¥ ¢ £    ¦ § ¨ ¨ ©  ¦...
  • Page 65 Downloaded from LpManual.com Manuals...

  • Page 66: General

    3.1 General 3 Diagnostic Programs General This chapter explains the diagnostic programs which tests and diagnoses the functions of the hardware components of this computer. The diagnostic programs can be classified into two types: OPTION and DIAGNOSTIC TEST. NOTE 1: This Diagnostic supports 6DFUDPHQWR$3 NOTE 2: Before test must set SATA Controller Mode to “Compatibility”...
  • Page 67 A Service Diagnostic BOOT CD A Formatted FLOPPY DISK A Test Media CD (A-BEX TEST CD-ROM TCDR-702)(for CD-ROM test) A Test Media DVD (Toshiba-EMI DVD-ROM TEST DISK TSD-1) An External Monitor (for DISPLAY test) A CD-ROM Driver (for CD-ROM test)

  • Page 68: Quick Start

    3.2 Quick Start 3 Diagnostic Programs Quick Start When the system is booting from Service Diagnostic CD, the following screen will be displayed: Please select a test item or select 0 to exit to )UHH-DOS: 3.2.1 Quick Test When this item is selected, the system will run the configured test items and generate a test report automatically.
  • Page 69 3 Diagnostic Programs 3.2 Quick Start Select ‘Test Mouse’ or press F8 to run the test. The prompt information would be displayed in the screen as below. This test item needs user to verify whether the mouse works normally. The test result will be displayed in the following screen: ¡...
  • Page 70 3.2 Quick Start 3 Diagnostic Programs Here is another method to run the test: Highlight a test item by using arrow keys, then, press Enter to start. If there are parameters provided, user should set parameters in the parameter dialog window. CPU Speed Test (Step by Step): Select test item: Select System—CPU—CPU Speed, then, press the Enter key.
  • Page 71 3 Diagnostic Programs 3.2 Quick Start Test Result System will automatically run and display the test result as follows: Following is the comparison report of the two testing methods mentioned above: 1) Configuration and Running As to the method used in Mouse test, the user is required to select test items by pressing Space key and set the parameters artificially, (See 3.3.3 Item’s Parameters Configuration) Then press F8 to start the test.

  • Page 72: Keyboard Layout Test

    3.2 Quick Start 3 Diagnostic Programs As to the method adopted in CPU Speed test, user should highlight the test item and press Enter to start testing. And the user has to setup the parameters every time before running the test. Using this method, only one test item would be tested at one time. 3.2.3 Keyboard Layout test The test purpose is to check whether 30 kinds of keyboards run well during the test procedure.

  • Page 73: Hotkey Test

    3 Diagnostic Programs 3.2 Quick Start It requires user to press the key and check whether the key in the screen changes color or not. User can terminate test by typing ‘END’. When testing the ‘Fn’ key, it must press the ‘Enter’ key at the same time. When the user has checked all the keys and all the keys in the screen have changed color, the diagnostics program would automatically end the test and report the pass information.

  • Page 74: Audio Record Test

    3.2 Quick Start 3 Diagnostic Programs 3.2.6 Audio Record Test Check whether the system could record the sound normally. If there is no error during the whole test, Pass; otherwise Fail. The test will repeat for four times. When the test is completed, a file named autest.log will be saved in the defined location.
  • Page 75 3 Diagnostic Programs 3.2 Quick Start In this screen, All lines which attribute could be edited and updated. The 1 line (the font in yellow with blue background) shows the attribute’s value that is read from the current system and the 2 line (the font in red with turquoise background) shows the same value as that in the 1 line before user’s editing.

  • Page 76: System Information

    3.2 Quick Start 3 Diagnostic Programs The attributes that have been modified would be marked in red; otherwise in yellow. User could press F2 to save the changes, or press F4 to ignore and exit the current program. 3.2.9 System Information This function is used to read the system information.

  • Page 77: View Logs

    3 Diagnostic Programs 3.2 Quick Start User can use function keys listed on the bottom of the screen to display the configuration of the component or exit the current program. On the left column, the components information is listed and user can use arrow keys or PgUp/PgDn to view the list and highlight the chosen component.

  • Page 78: Exit To )Uhh Dos

    3.2 Quick Start 3 Diagnostic Programs 3.2.11 Exit to 700 DOS Select this item to exit to )UHH DOS. 3.2.12 The Diagnostics Screen Explanation Below is an example of running a test item. It includes the following parts: Diagnostics Windows, Test Status Area, Progress Bar, Error List, Test Item’s Title, Status Bar and Message Box.
  • Page 79 3 Diagnostic Programs 3.2 Quick Start The error list of each test module is displayed at the lower right corner of the screen. It would display the total error quantity found in the test, the most recent five error codes and description would be shown here.
  • Page 80 3.2 Quick Start 3 Diagnostic Programs Current Time(C. TIME): Current system time, e.g. ‘C.TIME:2008-0-16 :42:40’ in the above screen; Test Time Remaining (LEFT): In TIMEBOUND mode, it would display the remaining test time at the same location as Current TIME (C. TIME) in the above screen; Current Loop Count: In LOOPBOUND mode, it will display the total LOOP number planning to execute and the current LOOP number have been finished, e.g.

  • Page 81: Options

    3 Diagnostic Programs 3.3Option Options 3.3.1 Overview In Service Diagnostics, with the Options menu user can configure the batch parameters, test item’s parameters and those parameters created by the LOG file. Options Menu Notes: Select All/None Items • Switch between selecting all test items and selecting none. The hot key is F6. Test Selected Items •...

  • Page 82: Batch Parameters Configuration

    3.3 Option 3 Diagnostic Programs Configure batch parameters and all the test item’s parameters. Load Batch Parameters • Upload all the test items and the parameters to the *.ini file. Save Batch Parameters • Save all the parameters and the test items that are configured in the editor to a specified file.
  • Page 83 3 Diagnostic Programs 3.3Option Test Order • Specify the order of the test items. Choose 'Sequence' to adopt the sequential mode; choose 'Random' to run the test items in random sequence. Test Options • Choose one of the following options: Wait On Error Wait for further confirmation while an error occurs.

  • Page 84: Item's Parameters Configuration

    3.3 Option 3 Diagnostic Programs Monitor the remaining battery capacity (percent). Monitor CPU Thermal Monitor the CPU temperature. Test Mode • LOOPBOUND The chosen test items will run repeatedly according to the times specified in the 'Number of Loops'. TIMEBOUND The chosen test items will run for an extent time specified in 'Time Limit Hrs' and 'Time Limit Min'.

  • Page 85: Load Batch Parameters

    3 Diagnostic Programs 3.3Option Repeat times of the test item. Interactive • If the item is enabled during the test, the test items that need user to response can run normally, such as PS2 Mouse test; If it is disabled, those test items will report FAIL.

  • Page 86: Save Batch Parameters

    3.3 Option 3 Diagnostic Programs In this window, you can specify the .INI files that you wanted to be edited or modified. 3.3.5 Save Batch Parameters Here you can save the edited or modified content to the batch parameters files. ¡...

  • Page 87: Log Parameters Setting

    3 Diagnostic Programs 3.3Option 3.3.6 LOG Parameters Setting You can access the Log Parameters screen through Service Diagnostics\Options - Generate Report. Report Destination • If selecting 'NONE', no log file will be generated; if selecting 'FILE', a log file with the name specified in 'Log File Name' will be generated.

  • Page 88: Specify Log Viewer

    3.3 Option 3 Diagnostic Programs If selecting this parameter, errors and time will be recorded only when the test fails. Append to Old Log File If selecting this parameter, the new log will be added to the old one. Log Device Info on Fail If selecting this parameter, details of the failed test will be recorded.

  • Page 89: Log Viewer

    3 Diagnostic Programs 3.3Option In this screen, you can specify a Log file and view it with the viewer designated in Specify LOG Viewer. 3.3.9 LOG Viewer Service Diagnostic Log viewer: ↑, ↓ • Scroll a line backward or forward on the screen. Page Up, Page Down •...

  • Page 90: Log File Sample

    3.3 Option 3 Diagnostic Programs Scroll a page backward or forward on the screen. • Exit the Log viewer. • Display the Help information about the Log viewer operations and the functional keys. Ctrl+Home • Go to the start of the log file. Ctrl+End •...
  • Page 91 3 Diagnostic Programs 3.3Option Base Memory Test : PASS Extended Memory Test : PASS End Time: Wed Jul 05 10:47:51 2006 <Module Name>: Service Diagnostic Ver 1.00 ... Mouse Test Build Date 2006.01.10 [MSTPad] Begin Time: Wed Jul 05 10:48:54 2006 Touch Pad Test : FAIL ITEM TEST FAIL...

  • Page 92: Subtests

    3.4 Subtests 3 Diagnostic Programs Subtests Test Test Item Subtest Test items Internal Name Group System Basic Functionality Test [CPUBasicFun] CPU Speed [CPUSpeed] Coprocessor Coprocessor NPU Basic Functions [NPUFun] NPU Interrupt [NPUInterrupt] CPU Information [CPUInformation] CPU Protected Mode [Protect] [MMX] Board DMA Controller [DMACtrl]...
  • Page 93 3 Diagnostic Programs 3.4 Subtests Memory Random Increment Read/Write [RandIncr] Data Bus Test [DataBus] Memory Speed [MemSpeed] Test Storage Sequential/Random R/W [SeqRdRW1] Sequential/Random Seek [Seek1] Performance [Perform1] Controller Check [Controller1] Diagnostic Read/Write [DiagRW1] SMART Test [SMART1] Controller Test [CDRWController] Data Transfer Rate [CDRWTransRate] Data CD Butterfly Seek [CDRWButterfly]...
  • Page 94 3.4 Subtests 3 Diagnostic Programs @ 6 A VESA K Mode B 2 9 @ 6 A VESA x 32bit Mode B 2 9 Video Modes VESA 1 x256 Mode _15] VESA 1 x64K Mode _16] VESA 1 Mode _24] VESA 1 K Mode _32]...

  • Page 95: System Test

    3 Diagnostic Programs 3.5 System Test System Test Move arrow keys and press the Space key to select CPU test item from Service Diagnostic menu, then highlight CPU and press the Enter to run this test item. Subtest 01 CPU 1.
  • Page 96 3.5 System Test 3 Diagnostic Programs CPU Speed Comparison--Whether you want to make a comparison of the CPU speed with the value set in ‘Expected CPU Speed’, you should choose ‘Yes’; otherwise, ‘No’. Expected CPU Speed--Specify the expected CPU Speed value you want for further comparison.
  • Page 97 3 Diagnostic Programs 3.5 System Test 5. CPU Protected Mode Test This test item is to check whether CPU protected mode instruction works normally. 6. MMX The test item is to confirm whether the CPU supports MMX instructions. Subtest 02 Boards 1.
  • Page 98 3.5 System Test 3 Diagnostic Programs This test item is to check: 1. Whether the current system supports Plug-n-Play; 2. Whether there is an ESCD (Extended System Configuration Data) in the BIOS; 3. Whether there is PCI-to-ISA bridge in the system; 4.
  • Page 99 3 Diagnostic Programs 3.5 System Test ¡ ¢ £ ¤ ¤ ¥ ¢ £ ¦ § ¨ ¨ © ¡ ¢ £ ¤ ¤ ¥ ¢ £    ¦ § ¨ ¨ ©  ¦ § ¨ ¨ © ©...

  • Page 100: Memory Test

    3.6 Memory Test 3 Diagnostic Programs Memory Test This test module is to check whether the memory chip works normally. Subtest 01 BIOS ROM This test item is to check the validity of BIOS ROM that includes two sub-items -- ROM Read and ROM Write Protection.
  • Page 101 3 Diagnostic Programs 3.6 Memory Test Pattern Size: Choose the pattern size – BYTE, WORD, DWORD or ALL. Percent (%): Choose the percentage of the defined range of the memory to be tested. Time Limit(h): Choose or Input the time (hour) of the defined range of the memory to be tested.
  • Page 102 3.6 Memory Test 3 Diagnostic Programs test coverage would be based on the setting and the value in ‘Percent (%) mentioned at below. Pattern Size: Choose the pattern size – BYTE, WORD, DWORD or ALL. Percent (%): Choose the percentage of the defined range of the memory to be tested.
  • Page 103 3 Diagnostic Programs 3.6 Memory Test In addition to the above pattern test of the memory, there is Read/Write Cycle test and Read Cycle Test for the extended memory. Below is the parameter dialog window of the extended pattern test. Test Range: Specify the test coverage range of Extended Memory.
  • Page 104 3.6 Memory Test 3 Diagnostic Programs The test item is to ensure that there is no short circuitry issue in memory chip. The parameter dialog window is the same as that in ‘Subtest 02 Pattern’. Subtest 06 Walking 0’s Test The test item is to ensure that there is no open circuitry issue in memory chip.
  • Page 105 3 Diagnostic Programs 3.6 Memory Test This test item is to check whether the data bus works normally. Subtest 12 Memory Speed Test This test item is to check the data-transferring rate for the cache memory and the system memory. ¡...

  • Page 106: Storage

    3.7 Storage 3 Diagnostic Programs Storage Subtest 01 HDD This test item runs on IDE hard disks. It checks the functions and performance of IDE hard disk. In order to protect user’s HDD data, the password must be verified before the HDD test.
  • Page 107 3 Diagnostic Programs 3.7 Storage LBA Start, LBA End--Specify the start and end byte in LBA (Large Block Address). Percent—Specify the coverage rate in percentage of the total disk. Time Limit(h): Choose or Input the time (hour) of the defined range of the total disk to be tested.
  • Page 108 3.7 Storage 3 Diagnostic Programs Percent-- Specify the coverage rate in percentage of the total disk. Time Limit(h): Choose or Input the time (hour) of the defined range of the total disk to be tested; Time Limit(m): Choose or Input the time (minute) of the defined range of the total disk to be tested.
  • Page 109 3 Diagnostic Programs 3.7 Storage Subtest 02 ODD The ODD test runs on IDE CDROM/DVD-ROM & CD-RW. It will check the ODD driver’s functionality and performance. 1. Controller Test Check the CDROM controller’s status. 2. Data Transfer Rate Check the data transfer rate of the ODD drive. It will read data from the ODD disc and calculate the data transfer rate.

  • Page 110: Video

    3.10 Peripheral 3 Diagnostic Programs Video This test item tests the video by: displaying the figures in different graphic modes. displaying the property and color of the characters in different text modes. User will confirm whether each video mode works normally by judging whether the display is correct.
  • Page 111 3 Diagnostic Programs 3.10 Peripheral It would display the below texts of the different attributes in the screen: 1. Text in normal attribute; 2. Text in blinking normal attribute; 3. Text in inverse attribute; 4. Text in blinking inverse attribute; 5.
  • Page 112 3.10 Peripheral 3 Diagnostic Programs 4. Text Color This test item is to check whether all 16 colors foreground and all 8 colors background works normally in VGA text mode. The bit4-6 of the attribute byte of a character defines 8 background colors (black, blue, green, cyan, red, brown, magenta, and light gray), and the bit0-3 defines 16 foreground colors (dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and white besides the above 8 colors).
  • Page 113 3 Diagnostic Programs 3.10 Peripheral This test item is to check whether 80*25 Text Mode works normally. In the test, user is required to respond according to the instruction in the screen. Subtest 02 640 * 480 VGA Mode This test item is to check whether 680*480 VGA Text mode works normally. In the test, user is required to respond according to the instruction in the screen.
  • Page 114 3.10 Peripheral 3 Diagnostic Programs Subtest 03 VESA Video Modes This test item is to check whether all the video modes supported by the video card works normally. In the test, user is required to respond following the instruction in the screen. 1.
  • Page 115 3 Diagnostic Programs 3.10 Peripheral If press Ctrl+Break to force the test to terminate during execution of VESA Video Memory, the test program will not operate and display properly in further tests. Subtest 05 AGP Test This test item is to report the system’s Accelerated Graphics Port status and check whether AGP registers works normally.
  • Page 116 3.10 Peripheral 3 Diagnostic Programs Subtest 07 Register Test This test item is to check whether the registers of the video adapter works normally. Subtest 08 Color Purity Test This test item is to check whether the system (the video adapter and the display) could display the purity color of red, green, blue, black and white.
  • Page 117 3 Diagnostic Programs 3.10 Peripheral Subtest 09 Direct Color Test This test item is to check the video adapter’s composing ability of direct color in high and true color mode. In the test, user is required to respond according to the instruction in the screen. Subtest 10 DAC/Palette Address This test item is to check the function of DAC registers and Palette registers.
  • Page 118 3.10 Peripheral 3 Diagnostic Programs NOTE 1:AMD platform can’t support this item Subtest 11 BitBlt Engine Test This test item is to check whether the BitBlt engine works normally. BitBlt is the abbreviation of ‘Bit Block Translate’, that means the copy of data block for 3 types, from video memory to video memory, from video memory to system memory, and from system memory to video memory.
  • Page 119 3 Diagnostic Programs 3.10 Peripheral NOTE 1:AMD platform can’t support this Test item ¡ ¢ £ ¤ ¤ ¥ ¢ £ ¦ § ¨ ¨ © ¡ ¢ £ ¤ ¤ ¥ ¢ £    ¦ § ¨ ¨ ©  ¦...

  • Page 120: Communication (Comm)

    3.10 Peripheral 3 Diagnostic Programs Communication (COMM) Subtest 01 LAN Card This test item is to check whether the module can detect the existence of the network card and display its related information. 1. Device ID Detection Detect the device ID of the network card. 2.

  • Page 121: Peripheral

    3 Diagnostic Programs 3.10 Peripheral 3.10 Peripheral Subtest 01 Keyboard This test item is to check whether the keyboard works normally. 1. Keyboard Data Line Test Check whether the keyboard data line works normally. 2. Keyboard Clock Line Test Check whether the keyboard clock line works normally. Subtest 02 Mouse Test Check whether the point devices work normally.

  • Page 122: Led Test

    3.10 Peripheral 3 Diagnostic Programs Subtest 03 Led Test 1. Led Test Check whether the Device led works normally. NOTE 1:If The Machine is AMD Platform, The HDD LED is very Dim ¡ ¢ £ ¤ ¤ ¥ ¢ £ ¦ § ¨ ¨ © ¡...

  • Page 123: Error Codes And Description

    3 Diagnostic Programs 3.11Error Codes and Description 3.11 Error Codes and description The format of ‘Error Code’ is ‘ddxxee’, and ‘dd’ is the device ID (1~2 chars), ‘xx’ is test function ID of device (2 chars), ‘ee’ is the error code of device (2 chars); the range of error code is from 01 to 99 in each device (the common error codes in all device are set to 99 and spanned).
  • Page 124 3.11Error Codes and Description 3 Diagnostic Programs The test pattern read out from the extension memory is different (XMS)Memory Problem As above. from the one that has been written in this address. (XMS) Out Of Range Wrong parameters setup. Check and reset the parameters. Interference between different Test this memory chip on Address Test Error...
  • Page 125 3 Diagnostic Programs 3.11Error Codes and Description configuration. Repeat multiple times. If there is PCI to ISA Bridge Error PCI-ISA bridge errors. always the same error, replace the board. ESCD Error ESCD errors. As above. ACPI Table Test Error Errors with the ACPI table test. As above. 34xx Fan Slow Speed Test Fail The fan slow speed test fails.
  • Page 126 3.11Error Codes and Description 3 Diagnostic Programs Check whether there is any Physical problems with the video VESA VRAM Test Error physical problem with the video card or the monitor. card or the monitor. Check and see whether the AGP AGP configuration register AGP Test Error video card has any physical...
  • Page 127 3 Diagnostic Programs 3.11Error Codes and Description Keyboard Map & Stroke Keyboard Map & Stroke Test Check the KBD connection and Test Fail fails. repeat the test. Clock Line Test Fail Clock Line Test fails. As above. Data Line Test Fail Data Line Test fails.

  • Page 128: Quick Test Item List

    3.12 Quick Test Item List 3 Diagnostic Programs 3.12 Quick Test Item List Device Test Items Comment Basic Functionality NPU Basic Functions CPU Information Memory BIOS ROM Cache Memory Bit Stuck High Test 10% or 3 minutes Bit Stuck Low Test 10% or 3 minutes Address Test Board...
  • Page 129 Chapter 4 Replacement Procedures Downloaded from LpManual.com Manuals...
  • Page 130 4 Replacement Procedures 4-ii Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 131 Removing the ODD Bay Module ...............4-19 Installing the ODD Bay Module.................4-20 Disassembling the ODD Bay Module ..............4-21 Assembling the ODD Bay Module..............4-21 Keyboard ........................4-22 Removing the Keyboard..................4-22 4-iii Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 132 Installing the FL Inverter Board .................4-44 4.15 LCD Modules ......................4-45 Removing the LCD module ................4-45 Installing the LCD Module.................4-47 4.16 CCD board and MIC ....................4-48 4-iv Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 133 Removing the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable...................4-53 Installing the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable....................4-54 Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 134 Figure 4-25 Removing the display mask................4-41 Figure 4-26 Removing the FL inverter board..............4-43 Figure 4-27 Removing the LCD module and screws ............4-46 Figure 4-28 Removing the LCD module................4-46 4-vi Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 135 Figure 4-31 Removing the touch pad and button board ............4-51 Figure 4-32 Removing the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable ....................4-53 4-vii Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 136: General

    First, remove the display mask and Touch Pad Board and Fan System Board FL inverter board, both of which are LCD Module shown above the LCD module. Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 137: Safety Precautions

    Never work with damp or wet hands. To avoid personal injury, use care to avoid the sharp edges or corners of the components. Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 138 Inside the PC are components that become hot during operation (such as the CPU and cooling module). To avoid burns, let the hot components cool down before starting inspection or repair task. Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 139: Before You Begin

    To avoid personal injury, use care to handle components that have sharp edges or corners. After you have replaced a FRU, check that the FRU works correctly to ensure normal computer operation. Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 140: Disassembly Procedures

    FRUs are secure. After installing a FRU, make sure that the FRU and computer work normally. Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 141: Tools And Equipment

    0.51 N m (5.0 kgf cm) M2.5x4 PSP TITE screws 0.204 N m (2.0 kgf cm) M2.5x6 GIZA TITE screws 0.36 N m (3.5 kgf cm) Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 142: Colors Of Screw Shanks

    6 mm bind screw 12 mm bind screw 5 mm stud (The numeral represents the rounded length of the threaded portion regardless of the entire stud length.) Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 143: Removing The Battery Pack

    Battery lock Battery pack Battery latch Figure 4-1 Removing the battery pack NOTE: Dispose of the used battery packs as required by local ordinances or regulations. Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 144: Installing The Battery Pack

    1. Gently insert a new or recharged battery pack into place. Check that the battery release latch slides in and stops with a click. 2. Slide in the battery lock. Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 145: Removing The Optional Pc Card

    2. When the eject button pops out slightly, push it again. 3. When the PC card pops out, grasp it and pull it out. PC card Eject button Figure 4-2 Removing the PC card 4-10 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 146: Installing The Optional Pc Card

    After the PC card is installed, check the hardware configuration in the Hardware Setup or TSETUP program to make sure that the PC card is compatible with the current hardware configuration. 4-11 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 147: Removing The Momery Card

    2. Push the memory card to be removed until it stops then release the memory card. 3. When the memory card pops out, grasp it and pull it out. Memory card Figure 4-3 Removing the memory card 4-12 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 148: Installing The Momery Card

    After the PC card is installed, check the hardware configuration in the Hardware Setup or TSETUP program to make sure that the PC card is compatible with the current hardware configuration. 4-13 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 149: Removing The Optional Memory

    4. Spread out the two memory lock latches so that the memory module pops up. 5. Pull the memory module up and out at an angle, using care to avoid touching the connectors. 4-14 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 150: Installing The Optional Memory

    TSETUP program to make sure that the installed memory module has been recognized by the system. If it has not been recognized yet, check the connections. 4-15 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 151: Hdd

    1. Release the two HDD cover screws securing the HDD cover. 2. Remove the HDD cover. HDD cover HDD cover secure screw HDD pack Figure 4-5 Removing the HDD pack 4-16 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 152 M3x4 Black flat head screw Figure 4-6 Removing the HDD chassis CAUTION: Do not apply pressure to the top or bottom of the drive. 4-17 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 153: Installing The Hdd

    HDD pack by its sides. 4. Insert the HDD pack. 5. Secure the HDD cover by tightening the HDD cover screw. 4-18 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 154: Odd Bay Module

    CAUTION: Handle the ODD bay module carefully it can become hot during operation. M2 5x6 black flat head screw ODD bay module Figure 4-7 Removing the ODD bay module 4-19 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 155: Installing The Odd Bay Module

    1. Place the ODD bay module in the correct position and slide it in. 2. Push it in until it clicks into place. 3. Secure the ODD bay module with one M2x5 black flat head screw. 4-20 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 156 Assemble the ODD drive according to the following procedures and Figure 4-8. 1. Seat the bracket and secure it with two M2x3 black flat head screws. 4-21 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 157: Keyboard

    5. Disconnect the keyboard cable from CN11 on the system board. 6. Remove the keyboard. M2x3 black flat head screw Keyboard cover Latch Keyboard Keyboard latch Keyboard latch CN11 Figure 4-9 Removing the keyboard 4-22 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 158: Installing The Keyboard

    3. Place the keyboard cover in the correct position and secure the following 12 latches, in that order: - One latch on each of the left and right sides - Five bottom latches - Five front latches 4-23 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 159: Mdc Module

    CAUTION: Do not touch the connectors on the MDC module or in the computer. Contaminated connectors can cause MDC module failures. M2x2 6 black flat head screw MDC card MDC cable Figure 4-10 Removing the MDC module 4-24 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 160: Installing The Mdc Module

    Setup or TSETUP program to make sure that the installed MDC module has been recognized by the system. If it has not been recognized yet, check the connections. 4-25 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 161: Wireless Lan Card

    3. Pull the wireless LAN card up from CN10 on the system board and out at an angle. Black cable M2x3 black flat head screw Antenna White cable Wireless LAN card CN10 Figure 4-11 Removing the wireless LAN card 4-26 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 162: Installing The Wireless Lan Card

    CAUTION: Do not touch the connectors on the wireless LAN card and in the computer with your bare hands. Wireless LAN cards can fail if they are contaminated with sweat, natural oils, etc. from your hands. 4-27 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 163: Top Cover

    6. Release the following 15 latches on the switch cover, in that order: - Four Left latches - Four right latches - Three front latches - Four bottom latches 7. Lift up the top cover. 4-28 Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 164: Installing The Top Cover

    6. Turn the computer upside down and secure it with the following 14 screws: - Eleven M2.5x6 black flat head screws and three M2x4 black flat head screws. 4-29 Satellite L300D / L305D/Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 165: Display Assembly

    6. Remove four M2.5x6 black flat head screws securing the LCD module to the bottom cover. 7. Remove the wireless antenna cables, CCD cable and MIC from the bottom cover. 8. Remove the display module. 4-30 Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 166: Installing The Display Assembly

    6. Close the display panel and turn the computer so the back is facing you and secure two M2.5x7 black flat head screws. 4-31 Satellite L300D / L305D/Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 167: System Board

    M2 5x6 black flat head screw Power board cable CRT cable AC IN cable System board CN14 USB cable Figure 4-16 Removing the system board 4-32 Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 168: Installing The System Board

    5. Connect the power button board cable to CN1 on the system board. 6. Connect the CRT cable to CN4 on the system board. 4-33 Satellite L300D / L305D/Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 169: Cpu Cooling Module And Fan

    5. Remove two M2x3 white flat head screws on the CPU cooling module bracket. 6. Remove the CPU bracket. 7. Remove two CPU cooling module securing screws. 8. Remove the CPU cooling module. 4-34 Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 170 M2x3 white flat head screw CPU cooling module bracket CPU cooling module secure screw CPU cooling module Figure 4-18 Removing the CPU cooling module 4-35 Satellite L300D / L305D/Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 171 4.10 CPU Cooling Module and Fan Figure 4-19 Applying silicon grease Figure 4-20 Replace new thermal pad into correct position. Figure 4-21 Tear down the tape. 4-36 Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 172: Installing The Cpu Cooling Module And Fan

    6. Place the fan in the correct position and secure it with two M2.5x5 black flat head screws. 7. Connect the fan cable to CN501 on the system board. 4-37 Satellite L300D / L305D/Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 173: Cpu

    (in the order shown in the figure below). 2. Remove the CPU. CLOSED OPEN CLOSED OPEN CLOSED OPEN CLOSED OPEN CLOSED OPEN Figure4-22 Removing the CPU 4-38 Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 174: Installing The Cpu

    C PU so cke t C PU Figure 4-23 Installing the CPU CAUTION: Seat the CPU by aligning the triangle with the shaded area. 4-39 Satellite L300D / L305D/Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 175 3. Secure the CPU by rotating the cam 120 degrees to the right with a flat-blade screwdriver. NOTE: FOXCONN CPU socket will be 180 degrees to the left. CLOSED OPEN CLOSED OPEN OPEN CLOSED Figure 4-24 Securing the CPU 4-40 Satellite L300D/L305D / Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 176: Display Mask

    - Nine bottom latches - Five latches on each of the left and right sides - Ten top latches Figure 4-25 Removing the display mask 4-41 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 177 3. Secure the following 4 seals to cover the screws, in that order: - Two black seals on the bottom - Two black seals on the top 4-42 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 178: Fl Inverter Board

    2. Lift the LCD module, FL inverter board and disconnect the LCD/FL cable from the LCD/FL connector. 3. Disconnect the HV cable from the HV connector and remove the FL inverter board. 4-43 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 179 2. Seat the LCD module, FL inverter board in the correct position. 3. Secure the FL inverter board with one M2.5x5 black flat head screw. 4-44 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 180: Lcd Module

    4. Remove the LCD brackets. 5. Turn the LCD upside down. Be sure to place it on a cushioned surface such as a foam pad. 4-45 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 181 6. Remove the tape and LCD/FL cable connector. Then disconnect the LCD/FL cable. LCD LF cable LCD module Figure 4-28 Removing the LCD module 4-46 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 182 When plug in LCD/FL cable into LCD module connector, need to plug horizontally. For Sharp panel, if LCD/FL cable connector is not plugged horizontally, it may be damaged. 4-47 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 183: Ccd Board And Mic

    CCD module CCD cable Display rear cover Figure 4-29 Removing the CCD board and MIC 3. Lift the MIC from the display rear cover. 4-48 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 184 Install the FL inverter board according to the following procedures and Figure 4-29. 1. Connect the CCD module cable to CCD module connector. 2. Seat the CCD module, MIC in the correct position. 4-49 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 185 3. Secure the left speaker with one M2x3 black flat head screw. 4. Secure the right speaker with two M2x3 black flat head screws. 4-50 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 186: Touch Pad And Button Board

    M2x3 black flat head screw M2x3 black flat head screw Touch pad bracket Touch pad Figure 4-31 Removing the touch pad and button board 4-51 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 187 3. Seat the button board in the correct position and secure it with the two M2x3 black flat head screws. 4. Connect the touch pad flat cables to CN5000 on the button board and touch pad. 4-52 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 188 USB cable M2 5x4 black flat head screw Figure 4-32 Removing the USB cable, CRT cable, Power Button Board, AC-IN cable and RJ11 cable 4-53 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 189 6. Secure the USB cable with one M2.5x4 black flat head screw. 7. Seat the RJ11cable in the correct position. 8. Route the RJ11cable in the wire guide. 4-54 Satellite L300D/L305D/ Satellite Pro L300D/ EQUIUM L300D/ SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 190 6000 1 Appendices Downloaded from LpManual.com Manuals...
  • Page 191 USB Port2 Board Cable Connector (5-Pin) ..Error! Bookmark not C.14 CN15 defined. C.15 CN16 PCMCIA Slot Module Connector (68-Pin) ..Error! Bookmark not defined. C.16 CN17 HDD Connector (22-Pin) ..... Error! Bookmark not defined. App-ii Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 192 Touch Pad Board Cable Connector (12-Pin) ..Error! Bookmark not defined. Appendix D Keyboard Scan/Character Codes ..............D-1 Appendix E Key Layout ....................E-1 Appendix F BIOS Rewrite Procedures ................F-1 Appendix G EC/KBC Rewrite Procedures ..............G-1 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300DMaintenance Manual App-iii Downloaded from LpManual.com Manuals...

  • Page 193: Appendix A Handling The Lcd Module

    Do not force the module into place, because stress can affect its performance. Also, the panel’s polarized surface is easily scarred, so be carefully when handling it. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual A-1 Downloaded from LpManual.com Manuals...
  • Page 194 4. If water or other liquid is left on the panel’s surface for a long period, it can change the screen’s tint or stain it. Be sure to quickly wipe off any liquid. A-2 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual...
  • Page 195 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual A-3 Downloaded from LpManual.com Manuals...
  • Page 196 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. A-4 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 197 10. If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual A-5 Downloaded from LpManual.com Manuals...

  • Page 198: Appendix B Board Layout

    Apx. B Board Layout Appendices Appendix B Appendix B Board Layout System Board Front View Figure B-1 Board Layout (Front) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual B-1 Downloaded from LpManual.com Manuals...
  • Page 199 Appendices Apx. B Board Layout System Board Back View Figure B-2 Board Layout (Back) B-2 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 200 C.29 CN4000 USB Port2 Connector (4-Pin) ............C-19 C.30 CN5000 Touch Pad Module Connector (12-Pin) ........... C-19 C.31 CN5001 Touch Pad Board Cable Connector (12-Pin) ........C-20 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-1 Downloaded from LpManual.com Manuals...

  • Page 201: Pin Assignments

    Signal Name N$1222331 N$1222331 DGND DGND CRT Cable Connector (14-Pin) Table C-4 CRT Cable Connector Pin Assignments (14-Pin) Pin No. Signal Name Pin No. Signal Name N$838148 N$1054333 C-2 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 202: Cn5 Lcd/Fl Inverter Cable Connector (40-Pin

    DGND LCM_DDCPCLK LCM_DDCPDATA N$1055355 N$1055355 N$1055355 N$1055355 N$1055355 N$1055355 INV_PWM_3 N$782033 DGND DGND DGND DGND Modem Module Connector (12-Pin) Table C-6 Modem Module Connector Pin Assignments (12-Pin) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-3 Downloaded from LpManual.com Manuals...

  • Page 203: Cn8 Touch Pad Board Cable Connector (12-Pin

    CN10 Internal Speaker Cable Connector (6-Pin) Table C-9 Internal Speaker Cable Connector Pin Assignments (6-Pin) Pin No. Signal Name Pin No. Signal Name SPK_OUT_R- SPK_OUT_R+ N$1166475 SPEAKER_ID C-4 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 204: Cn11 Wireless Lan Module Connector (52-Pin

    LPC_3S_AD(0) BUF_PLT_RST# DGND CLK_R3S_MINICARD2 WXMIT_OFF# DGND BUF_PLT_RST# PCIE_C_RXN2 +V3A_WLAN PCIE_C_RXP2 DGND DGND +V1.5S DGND ICH_3A_ALERT_CLK PCIE_C_TXN2 ICH_3A_ALERT_DAT PCIE_C_TXP2 DGND DGND N$1190655 N$1190654 DGND +V1.5S DGND PCI_3S_SERIRQ +V3S Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-5 Downloaded from LpManual.com Manuals...
  • Page 205 Express Card Module Connector Pin Assignments (26-Pin) Pin No. Signal Name Pin No. Signal Name DGND USB_P4- USB_P4+ CPUSB# ICH_3A_ALERT_CLK ICH_3A_ALERT_DAT +V1.5_EXP +V1.5_EXP PCIE_WAKE# +V3AUX_EXP PERST# +V3_EXP +V3_EXP EXP_REQ# CPPE# CLK_R_PCIE_CARD# C-6 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 206 Signal Name Pin No. Signal Name DGND ACARD_3S_AD0 ACARD_3S_AD1 ACARD_3S_AD3 ACARD_3S_AD5 ACARD_3S_AD7 ACARD_3S_CBE0# ACARD_3S_AD9 ACARD_3S_AD11 ACARD_3S_AD12 ACARD_3S_AD14 ACARD_3S_CBE1# ACARD_3S_PAR ACARD_3S_PERR# ACARD_3S_GNT# ACARD_3S_INT# +VCC_CARD +VPP_CARD N$1137688 ACARD_3S_IRDY# ACARD_3S_CBE2# ACARD_3S_AD18 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-7 Downloaded from LpManual.com Manuals...

  • Page 207: Cn17 Hdd Connector (22-Pin

    HDD Connector (22-Pin) Table C-16 HDD Connector Pin Assignments (22-Pin) Pin No. Signal Name Pin No. Signal Name DGND SATA_C_TXP0+ SATA_C_TXN0 DGND SATA_RXN0 SATA_RXP0 DGND DGND DGND DGND +V5S C-8 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 208: Cn500 Battery Pack Connector (9-Pin

    DDR2 DIMM0 Connector Pin Assignments (200-Pin) Pin No. Signal Name Pin No. Signal Name M_VREF DGND DGND MA_DATA(4) MA_DATA(0) MA_DATA(5) MA_DATA(1) DGND DGND MA_DM(0) MA_DQS#(0) DGND MA_DQS(0) MA_DATA(6) DGND MA_DATA(7) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-9 Downloaded from LpManual.com Manuals...
  • Page 209 DGND DGND MA_DATA(24) MA_DATA(28) MA_DATA(25) MA_DATA(29) DGND DGND MA_DM(3) MA_DQS#(3) MA_DQS(3) DGND DGND MA_DATA(26) MA_DATA(30) MA_DATA(27) MA_DATA(31) DGND DGND MA_CKE0 MA_CKE1 +V1.8 +V1.8 MA_CS2# MA_A(15) MA_BA2 MA_A(14) C-10 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 210 MA_DM(4) MA_DQS(4) DGND DGND MA_DATA(38) MA_DATA(34) MA_DATA(39) MA_DATA(35) DGND DGND MA_DATA(44) MA_DATA(40) MA_DATA(45) MA_DATA(41) DGND DGND MA_DQS#(5) MA_DM(5) MA_DQS(5) DGND DGND MA_DATA(42) MA_DATA(46) MA_DATA(43) MA_DATA(47) DGND DGND Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-11 Downloaded from LpManual.com Manuals...

  • Page 211: Cn503 Ddr2 Dimm1 Connector (200-Pin

    DDR2 DIMM1 Connector Pin Assignments (200-Pin) Pin No. Signal Name Pin No. Signal Name M_VREF DGND DGND MB_DATA(4) MB_DATA(0) MB_DATA(5) MB_DATA(1) DGND DGND MB_DM(0) MB_DQS#(0) DGND MB_DQS(0) MB_DATA(6) DGND MB_DATA(7) C-12 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 212 DGND DGND MB_DATA(24) MB_DATA(28) MB_DATA(25) MB_DATA(29) DGND DGND MB_DM(3) MB_DQS#(3) MB_DQS(3) DGND DGND MB_DATA(26) MB_DATA(30) MB_DATA(27) MB_DATA(31) DGND DGND MB_CKE0 MB_CKE1 +V1.8 +V1.8 MB_CS2# MB_A(15) MB_BA2 MB_A(14) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-13 Downloaded from LpManual.com Manuals...
  • Page 213 MB_DM(4) MB_DQS(4) DGND DGND MB_DATA(38) MB_DATA(34) MB_DATA(39) MB_DATA(35) DGND DGND MB_DATA(44) MB_DATA(40) MB_DATA(45) MB_DATA(41) DGND DGND MB_DQS#(5) MB_DM(5) MB_DQS(5) DGND DGND MB_DATA(42) MB_DATA(46) MB_DATA(43) MB_DATA(47) DGND DGND C-14 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 214: Cn505 Odd Connector (50-Pin

    ODD Connector Pin Assignments (50-Pin) Pin No. Signal Name Pin No. Signal Name N$777489 N$777490 N$777491 N$630732 N$630731 PIDE_3S_D(8) PIDE_3S_D(7) PIDE_3S_D(9) PIDE_3S_D(6) PIDE_3S_D(10) PIDE_3S_D(5) PIDE_3S_D(11) PIDE_3S_D(4) PIDE_3S_D(12) PIDE_3S_D(3) PIDE_3S_D(13) Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-15 Downloaded from LpManual.com Manuals...

  • Page 215: Cn506 Usb Port0 & Port1 Connector (8-Pin

    DGND C.23 CN507 HDMI Connector (19-Pin) Table C-23 HDMI Connector Pin Assignments (19-Pin) Pin No. Signal Name Pin No. Signal Name HDMI_L_TX2P DGND HDMI_L_TX2N HDMI_L_TX1P DGND HDMI_L_TX1N C-16 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 216: Cn508 Bridge Media Slot Connector (21-Pin

    CN510 Broadcom Decoder Connector (52-Pin) Table C-25 Broadcom Decoder Connector Pin Assignments (52-Pin) Pin No. Signal Name Pin No. Signal Name +V3S DGND +V1.5S N$1090691 DGND CLK_R_PCIE_HDDVD# Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-17 Downloaded from LpManual.com Manuals...

  • Page 217: Jack500 Rj45 Lan Connector (12-Pin

    Signal Name Pin No. Signal Name LAN_45 LAN_45 LAN_78 LAN_78 N$1140917 LED_R3S_LANLINK# N$1140918 N$1245527 C.27 JACK501 External MIC Connector (6-Pin) Table C-27 External MIC Connector Pin Assignments (6-Pin) C-18 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 218: Jack502 Head Phone Connector (6-Pin

    Touch Pad Module Connector (12-Pin) Table C-30 Touch Pad Module Connector Pin Assignments (12-Pin) Pin No. Signal Name Pin No. Signal Name LEFT_TP N$1056793 RIGHT_TP GND_TP GND_TP TP_IM_CLK_5 TP_IM_DAT_5 N$1052684 N$1052684 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual C-19 Downloaded from LpManual.com Manuals...

  • Page 219: Cn5001 Touch Pad Board Cable Connector (12-Pin

    Touch Pad Board Cable Connector (12-Pin) Table C-31 Touch Pad Board Cable Connector Pin Assignments (12-Pin) Pin No. Signal Name Pin No. Signal Name GND_TP DB_TP_LED_ON TP_IM_CLK_5 TP_IM_DAT_5 +TP_5S C-20 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 220 Table D-1 Scan Codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Note Keytop Make Break Make Break ‘ ~ 7 & BkSp Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual D-1 Downloaded from LpManual.com Manuals...
  • Page 221 Code set 1 Code set 2 Note Keytop Make Break Make Break Caps Lock ‘ “ Enter Shift (L) No.102 , < . > ¡ Shift (R) D-2 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 222 Table D-1 Scan Codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Note Keytop Make Break Make Break Ctrl Alt (L) Space ALT (R) ← Home ↑ ↓ PgUp PgDn → Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual D-3 Downloaded from LpManual.com Manuals...
  • Page 223 6. * Refer to Table D-6, No. 124 key scan code. 7. * Refer to Table D-7, No. 126 key scan code. 8. * 205~207 are for JAPAN keyboard only D-4 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 224 With right Shift Set 1 E0 AA___________ E0 B6 E0 2A ___________ E0 36 Set 2 E0 F0 12 ________ E0 F0 59 E0 12 ___________ E0 59 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual D-5 Downloaded from LpManual.com Manuals...
  • Page 225 ↓ PgUp PgDn → Table D-4 Scan Codes with Fn key Code set 1 Code set 2 Keytop Make Break Make Break CTRL LALT ARROW NUMERIC Scrl D-6 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 226 (–) Table D-6 No.124 key scan code Shift Code set 1 Code set 2 Make Break Make Break Prt Sc Common Ctrl + Shift + Alt + Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual D-7 Downloaded from LpManual.com Manuals...
  • Page 227 Code set 1 Code set 2 Make Make Pause Common* E1 1D E1 F0 Ctrl* E0 46 7E E0 F0 *: This key generates only make codes. D-8 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...

  • Page 228: Appendix E Key Layout

    Apx. E Key Layout Appendices Apx. E Key Layout Appendix E Key Layout United States (US) Keyboard Figure E-1 US keyboard Japan (JP) Keyboard Figure E-2 JP keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-1 Downloaded from LpManual.com Manuals...
  • Page 229 Appendices Apx. E Key Layout Spanish (SP) Keyboard Figure E-3 SP keyboard Korean (KR) Keyboard Figure E-4 KR keyboard E-2 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 230 Apx. E Key Layout Appendices Canadian Bilingual (QB) Canadian Bilingual (QB) Canadian Bilingual (QB) Canadian Bilingual (QB) Keyboard Figure E-5 QB keyboard French (FR) Keyboard Figure E-6 FR keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-3 Downloaded from LpManual.com Manuals...
  • Page 231 Appendices Apx. E Key Layout German (GR) Keyboard Figure E-7 GR keyboard Italian (IT) Keyboard Figure E-8 IT keyboard E-4 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 232 Apx. E Key Layout Appendices Taiwan (TC) Keyboard Figure E-9 TC keyboard E.10 Portuguese (PT) Keyboard Figure E-10 PT keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-5 Downloaded from LpManual.com Manuals...
  • Page 233 Appendices Apx. E Key Layout E.11 DU, UE, US International (USE) Keyboard Figure E-11 USE keyboard E.12 Arabic (AR) Keyboard Figure E-12 AR keyboard E-6 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 234 Apx. E Key Layout Appendices E.13 Belgian (BE) Keyboard Figure E-13 BE keyboard E.14 Russian (RU) Keyboard Figure E-14 RU keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-7 Downloaded from LpManual.com Manuals...
  • Page 235 Appendices Apx. E Key Layout E.15 Swiss/Switzerland (SL) Keyboard Figure E-15 SL keyboard E.16 Swedish (SW) Keyboard Figure E-16 SW keyboard E-8 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 236 Apx. E Key Layout Appendices E.17 Norwegian (NO) Keyboard Figure E-17 NO keyboard E.18 Danish (DK) Keyboard Figure E-18 DK keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-9 Downloaded from LpManual.com Manuals...
  • Page 237 Appendices Apx. E Key Layout E.19 Turkey (TR) Keyboard Figure E-19 TR keyboard E.20 Greek (GK) Keyboard Figure E-20 GK keyboard E-10 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 238 Apx. E Key Layout Appendices E.21 Canadian Multinational (CM) Keyboard Figure E-21 CM keyboard E.22 Herbrew (HE) Keyboard Figure E-22 HE keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-11 Downloaded from LpManual.com Manuals...
  • Page 239 Appendices Apx. E Key Layout E.23 Czech (CZ) Keyboard Figure E-23 CZ keyboard E.24 Scandinavian (N5) Keyboard Figure E-24 N5 keyboard E-12 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 240 Apx. E Key Layout Appendices E.25 Hungary (HU) Keyboard Figure E-25 HU keyboard E.26 Slovakian (SK) Keyboard Figure E-26 SK keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-13 Downloaded from LpManual.com Manuals...
  • Page 241 Appendices Apx. E Key Layout E.27 Yugoslavia (YU) Keyboard Figure E-27 YU keyboard E.28 Thai (TH) Keyboard Figure E-28 TH keyboard E-14 Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual Downloaded from LpManual.com Manuals...
  • Page 242 Apx. E Key Layout Appendices E.29 United Kingdom (EN) Keyboard Figure E-29 EN keyboard E.30 Turkish F (TF) Keyboard Figure E-30 TF keyboard Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual E-15 Downloaded from LpManual.com Manuals...

  • Page 243: Appendix F Bios Rewrite Procedures

    (Keep holding down the key until a message appears on the screen.) The BIOS rewriting starts. 6. When the process is completed, eject the BIOS/EC/KBC rewriting disk and the system is automatically reset. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual F-1 Downloaded from LpManual.com Manuals...
  • Page 244 (maximum), depending on the conditions of the computer or ICs. The computer is not hung up. Allow sufficient time. Never reboot or turn off the power to the computer before the rewriting is completed. Satellite L300D/L305D/Satellite Pro L300D/EQUIUM L300D/SATEGO L300D Maintenance Manual G-1 Downloaded from LpManual.com Manuals...

This manual is also suitable for:

Satellite l305dSatellite pro l300dEquium l300dSatego l300d

Table of Contents