HID Omnikey 5321
l
Gemalto PC USB-SW
l
11.1.3 CAC Smart Card Properties
For smart card authentication and SSO, the smart card must meet one of these
specifications:
GSC-IS v2.0 and v2.1 cards (firmware 3.2.0 or later)
l
PIV transitional cards (firmware 3.4.0 or later)
l
PIV endpoint cards (firmware 3.4.0 or later)
l
11.1.4 .Net Smart Card Properties
For smart card authentication and SSO, the smart card must be a Gemalto .Net card
(firmware 3.4.1 or later).
11.1.5 Communication Protocol
The communication protocol between the smart card and the reader is referred to as T=X,
where X is 0 or 1. Firmware 3.2.0 or later supports T=0. Firmware 3.4.0 and later supports
T=1.
11.1.6 Card Certificate Requirements
A certificate on the smart card must have these properties:
Key usage set to digital signature
l
Subject Common Name and/or Subject Alternative Name (Other Name) is set
l
Enhanced Key Usage includes Client Authentication and/or Smart Card Logon
l
Key Length is no larger than 2048 bits
l
11.1.7 Tested Smart Card Models
Teradici has tested these specific smart card models:
Smart Card Model
Axalto Cryptoflex .NET
Gemalto Cyberflex Access 64K V2c
Gemalto TOP DL GX4 144K DI
Gemalto TOP DM GX4 72K (FIPS)
GnD SmartCafe Expert 144K DI v3.2
Oberthur CosmopolIC 64K V5.2
Oberthur ID-One Cosmo 64 v5.2D Fast ATR with PIV
TER0606004 Issue 16
PCoIP Administrator's Guide
Tested for Firmware Release
(or later)
3.4.1
3.4.0
3.4.0
3.4.0
3.4.0
3.2.0
3.4.0
147