Figure 4-51: Osd Display Page - Teradici t310 Administrator's Manual

Parameter
Enable display override
TER0606004 Issue 16

Figure 4-51: OSD Display Page

Description
This option is intended for legacy systems. It configures the client to
send default EDID information to the host when a monitor cannot be
detected or is not attached to the client. In versions of Windows prior
to Windows 7, once the host had no EDID information, it would
assume no monitors were attached and would never recheck. This
option ensures that the host always has EDID information when the
client is in session.
The following default resolutions are advertised when this option is
enabled:
800x600 @60 Hz
l
1024x768 @60 Hz (native resolution advertised)
l
1280x800 @60 Hz
l
1280x960 @60 Hz
l
1280x1024 @60 Hz
l
1600x1200 @60 Hz
l
1680x1050 @60 Hz
l
1680x1050 @60 Hz
l
1920x1080 @60 Hz
l
1920x1200 @60 Hz
l
Any displays attached to the client will be set to the native resolution
PCoIP Administrator's Guide
100